LG Electronics E2050T, E2350T, E2250T manual On Installation

Page 3

Important Precautions

On Installation

Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage.

Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.

Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation. If these openings are blocked, built-up heat can cause failures which may result in a fire hazard. Therefore, NEVER:

Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc. Place the display in a built-in enclosure unless proper ventilation is provided.

Cover the openings with cloth or other material.

Place the display near or over a radiator or heat source.

Do not rub or strike the Active Matrix LCD with anything hard as this may scratch, mar, or damage the Active Matrix LCD permanently.

Do not press the LCD screen with your finger for a long time as this may cause some afterimages.

Some dot defects may appear as Red, Green or Blue spots on the screen. However, this will have no impact or effect on the display performance.

If possible, use the recommended resolution to obtain the best image quality for your LCD display. If used under any mode except the recommended resolution, some scaled or processed images may appear on the screen. However, this is characteristic of the fixed-resolution LCD panel.

Leaving a fixed image on the screen for a long time may cause damage to the screen and cause image burn-in. Make sure to use a screen saver on the product. Burn-in and related problems are not covered by the warranty on this product.

Do not shock or scratch the front and sides of the screen with metallic objects. Otherwise, it may cause damage to the screen.

Make sure the panel faces forward and hold it with both hands to move. If you drop the product, the damaged product can cause electric shock or fire. Contact an authorized the service center for repair.

Avoid high temperatures and humidity.

2

Image 3
Contents E2050T E2250T E2350T To Avoid Personal Injury Important PrecautionsOn Safety Do not Open the DisplayOn Installation On Cleaning On RepackingOn Disposal Thank for selecting LGE products AccessoriesWay stand Connecting the DisplayWay stand Connecting the Display Ergonomic Positioning your displayWithout stand base Only Analog Mode Connecting with the PCSMART+ Button Control Panel FunctionsFront Panel Controls Menu ButtonInput Button Power IndicatorAuto Image Adjustment Auto ButtonScreen Adjustment On Screen Display OSD Control AdjustmentOn Screen DisplayOSD Selection and Adjustment Button Tip Menu Name Icons Sub- menusRED Color Temp PresetUser GammaClock PhaseHorizontal VerticalWhite Balance Language Power IndicatorReset Language ButtonExit Move Restart to select sub-menu Main menu Sub menu Description Move Menu Name Icons Sub Movie Sub menu DescriptionTroubleshooting Is the power indicator light on?OSD Unlocked will appear Display image is incorrect Screen blinks Have you installed the display driver?Specifications E2250T Display Sync Input Video Input Resolution Plug&PlayE2350T Indicator Preset Modes ResolutionDigitally yours
Related manuals
Manual 34 pages 47.1 Kb