Sony XP-SR321 Playback → J, Eass 3⋅ Electronic Anti-Shock System → L, Resume function → M

J		STOP/OFF
		CHARGE
	1	3

2

PHONES/

LINE OUT

1 2

3 PLAY/PAUSE

K

ENTER/DISP

L E.A.S.S

M

PLAY MODE

PLAYBACK → J

Pull out the rubber cap and connect the supplied headphones to the PHONES/ LINE OUT jack.

The amplified speaker system can be connected instead to enjoy the CD sound.

1Release HOLD.

2Place a disc.

3Press ePLAY/PAUSE. Playback starts from the first track. a track number

b elapsed playing time c volume indicator

Basic operation

To stop	Press sSTOP/OFF/CHARGE.
To pause	Press ePLAY/PAUSE.
	To resume, press it again.
To search for the beginning of a track	Press r or t.
To locate a desired passage	Keep ror tpressed.
	Release the button at the start of desired
	passage.
Display during playback → K

Press ENTER/DISP during playback to change the display as follows.

1Track display and elapsed playing time (normal display)

V

2Track display and remaining playing time of the track in play

V

3Remaining number of tracks and remaining playing time

The time is not displayed in following cases.

•When trying to program tracks beyond No.32.

•When the total remaining time of the programmed tracks is over 100 minutes.

E•A•S•S 3⋅ (Electronic Anti-Shock System) → L

The E•A•S•S 3 ⋅ function reduces skipping or muting of the sound when the unit is subjected to shocks.

The player keeps about 48 seconds or 12 seconds of playback sound in its memory.

When you start playback, the unit keeps 48 seconds in memory.

To keep 12 seconds in the memory, press E•A•S•S repeatedly until

and appear.

To cancel the E•A•S•S 3⋅ function, press E•A•S•S repeatedly until E•A•S•S appears.

Note

•Before jogging with this unit, allow sufficient time for the memory buffer to fill up completely (ideally about 20 seconds).

Continuous shock or vibration may cause the sound to be interrupted even if the E•A•S•S 3 ⋅ function is activated. This is normal and not a malfunction. Should you experience an interruption in sound, stabilize the unit for a few seconds, then resume your activity.

•When the E•A•S•S 3 ⋅ function is activated, motor noise is heard as the motor periodically rotates at high speed during playback. This is not a malfunction.

•When E•A•S•S is pressed, the unit will pause for about 2 seconds.

•When the unit is set to E•A•S•S-off or -12 second mode, the quality of the sound will be better than E•A•S•S-48 second mode.

Resume function → M

Set the HOLD switch to RESUME.

appears, and you can start playback from the point where you stopped playback by pressing sSTOP/OFF/CHARGE.

When the resume function is on, all-track repeat is selected automatically.

To cancel resume play, set the HOLD switch to OFF.

Note

•Resume play may start at a point about 30 seconds behind or ahead the stopped point. Resume play may not operate if you stopped at the last 30 seconds of the final track.

•Resume play will be canceled if you open the disc compartment. If the unit is turned off, resume play will not be canceled. In this case, be sure to set the HOLD switch to OFF before changing discs.

Random play → M

Press PLAY MODE while in standby mode to display . Tracks on the disc are played in random order.

To cancel random play, press PLAY MODE while in standby mode.

display changes to .

Note

•You cannot back to previous track by pressing r during random play.

•You cannot select one-track repeat during random play.

Repeat play → M

Press PLAY MODE during playback to select repeat play as follows.

: one-track repeat B

V

: all-track repeat