LG Electronics 42LW5700, 65LW6500, 60PZ950U, 60PZ750, 55LV5400 manual Connecting toa wireless network

- @ NOTE

*If you want to access the Internet directly on your TV, the broadband internet connection should always be on.

If you cannot access the Internet, check the network conditions from a PC on your network.

When you use Network Setting, check the LAN cable or check if DHCP in the router is turned on.

If you do not complete the network settings, the network may not work properly.

ENTERTAINMENT 51

Connecting toa wireless network

The LG Wireless LAN for Broadband/DLNA

Adaptor, which is sold separately, allows the TV to connect to a wireless LAN network.

The network configuration and connection method

may vary depending on the equipment in use

and the network environment. Refer to the setup instructions supplied with your access point or

wireless router for detailed connection steps and network settings.

Setting up the AP (Access Point) or the wireless router is required before connecting the TV to the network. The easiest method is the WPS button method (Third method in this section).

(LW9500 series: Built-in the Wi-Fi Module, Unnecessary Wireless LAN for Broadband/DLNA adaptor setup)

1

Internet "

r @ NOTE

For enjoying pictures, music, or video stored on a PC using the router, a wired connection is recommended.

When the wireless port of the router is used, there may be restrictions on some functions. It is recommended that an Access Point (AP) be located more than 1 m (3.28 ft) away from the TV. If the AP is installed closer than 1 m, the magic motion remote control may not perform as expected due to frequency interference.

Downloaded From TV-Manual.com Manuals