![](/images/new-backgrounds/1126397/126397227x1.webp)
APPENDIX
01. Power (Command: k a)
GTo control Power On/Off of the TV. Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data 00 : Power Off01 : Power On
Ack
[a][ ][Set ID][ ][OK/NG][Data][x]
G To show Power On/Off.
Transmission
[k][a][ ][Set ID][ ][FF][Cr] Ack
[a][ ][Set ID][ ][OK/NG][Data][x]
*Similarly, if other functions transmit ‘0xFF’ data based on this format, Acknowledgement data feed back pre- sents status about each function.
*OK Ack. ,Error Ack. and other message maybe display on the screen when TV is power On.
02. Aspect Ratio (Command: k c) (Main Picture Size)
G To adjust the screen format. (Main picture format)
You can also adjust the screen format using the
Aspect Ratio in the Q.MENU. or PICTURE menu.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
|
| Data | 01 | : Normal screen (4:3) | 06 | : Original |
|
| |||||
|
|
| 02 | : Wide screen (16:9) | 07 : 14:9 | |
APPENDIX |
| 04 | : Zoom1 | |||
| 09 | : Just Scan | ||||
| 05 | : Zoom2 | ||||
|
|
| ||||
|
|
|
|
| ||
|
| Ack |
|
|
|
|
|
|
|
|
| ||
|
| [c][ | ][Set ID][ ][OK/NG][Data][x] |
| ||
|
|
|
|
|
|
|
* Using the PC input, you select either 16:9 or 4:3
screen aspect ratio.
* In HDMI/Component (over 720p) mode, Just Scan is available.
* You can only select Original in UK digital teletext
03. Screen Mute (Command: k d) G To select screen mute on/off. Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data 00 : Screen mute off (Picture on) 01 : Screen mute on (Picture off)
Ack
[d][ ][Set ID][ ][OK/NG][Data][x]
112
04. Volume Mute (Command: k e)
G To control volume mute on/off.
You can also adjust mute using the MUTE button on remote control.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data 00 : Volume mute on (Volume off) 01 : Volume mute off (Volume on)
Ack
[e][ ][Set ID][ ][OK/NG][Data][x]
05. Volume Control (Command: k f)
G To adjust volume.
You can also adjust volume with the VOLUME buttons on remote control.
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
* Refer to ‘Real data mapping 1’. See page 114.
Ack
[f][ ][Set ID][ ][OK/NG][Data][x]
06. Contrast (Command: k g)
GTo adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
* Refer to ‘Real data mapping 1’. See page 114.
Ack
[g][ ][Set ID][ ][OK/NG][Data][x]
07. Brightness (Command: k h)
GTo adjust screen brightness.
You can also adjust brightness in the PICTURE menu.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
* Refer to ‘Real data mapping 1’. See page 114.
Ack
[h][ ][Set ID][ ][OK/NG][Data][x]
08. Colour (Command: k i)
G To adjust the screen colour.
You can also adjust colour in the PICTURE menu.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
* Refer to ‘Real data mapping 1’. See page 114.
Ack
[i][ ][Set ID][ ][OK/NG][Data][x]
Downloaded From