LG Electronics 426***, 60PG7***, 60PG6***, 527***, 50PG7*** 112, Acknowledgement z Set ID OK/NGDatax

APPENDIX

APPENDIX

20.Abnormal State (Command: k z) To recognize an abnormal state.

Transmission [k][z][ ][Set ID][ ][FF][ ][Cr]

Data FF: Read

Acknowledgement [z][ ][Set ID][ ][OK/NG][Data][x]

Data 00: Normal (Power on and signal exist)

Data 01: No signal (Power on)

Data 02: Turn the TV off by remote control

Data 03: Turn the TV off by sleep time function

Data 04: Turn the TV off by RS-232C function

Data 05: 5V down

Data 06: AC down

Data 07: Turn the TV off by Fan Alarm function (option)

Data 08: Turn the TV off by Off time function

Data 09: Turn the TV off by Auto off function

Data a: Turn the TV off by AV board detection.

*This function is “read only”.

21.ISM Method (Command: j p)

To avoid having a fixed image remain on screen.

	Transmission [j][p][ ][Set ID][ ][Data][Cr]
	MSB											LSB
	0			0		0		0	0	0	0	0
			Reserved												Inversion
													Orbiter
											White Wash
										Normal
7	6				5	4		3	2	1	0			Function
								0	0	0	1			Inversion
								0	0	1	0			Orbiter
								0	1	0	0			White wash
								1	0	0	0			Normal
x		x			x		x							Reserved

*More two kinds of function can not be set at a time.

Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x]

22.Low Power(Power Saving) (Command: j q) To reduce the power consumption of the TV. Transmission [j][q][ ][Set ID][ ][Data][ ][Cr] Data Min: 00 ~ Max: 04

(*transmit by Hexadecimal code)

Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x]

23 . Auto Configure (Command: j u)

To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode.

Transmission [j][u][ ][Set ID][ ][Data][Cr]

Data 01: To set

Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]

24. Equalize(Command: j v)

		G To adjust equalize.
		Transmission [j][v][						][Set ID][					][Data][Cr]
		MSB															LSB
			0		0		0	0		0			0		0		0
				Frequency								Data
7	6		5			Frequency			4		3		2	1		0				Step
0	0		0			1’st Band			0		0		0	0		0			0(decimal)
0	0		1			2’nd Band			0		0		0	0		1			1(decimal)
0	1		0			3’rd Band			0		0		0	1		0			2(decimal)
0	1		1			4’th Band												...
1	0		0			5’th Band
1	0		1			6’th Band
1	1		0			7’th Band			1		1		1	1		0		30(decimal)
1	1		1			8’th Band			1		1		1	1		1		31(decimal)

Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x]

* Real data mapping 1		* Real data mapping 2
00 : Step 0		00: -30
		01: -29
A	: Step 10	02: -28
F	: Step 15	1E: 0
10	: Step 16
		28: +10
64	: Step 100
		3A : +28
6E	: Step 110	3B : +29
		3C : +30
73	: Step 115
74	: Step 116	4E: N/A
		4F: N/A
C7	: Step 199	50: N/A
FE	: Step 254
FF	: Step 255

112