LG Electronics 37LG50 External Equipment Setup, HD Receiver Setup, External Eqipment Setup

EXTERNAL EQUIPMENT SETUP

■To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment.

■This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the 22LS4D* models.

HD RECEIVER SETUP

■This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the diagram as shown below.

Connecting with a component cable

1Connect the video outputs (Y, PB, PR) of the digital set top box to the COMPONENT IN VIDEO jacks on the TV.

2Connect the audio output of the digital set-top box to the COMPONENT IN AUDIO jacks on the TV.

3Turn on the digital set-top box.

(Refer to the owner’s manual for the digital set-top box.)

4Select Component input source using the INPUT button on the remote control.

Signal	Component	HDMI
480i/576i	Yes	No
480p/576p	Yes	Yes
720p/1080i	Yes	Yes
1080p	Yes	Yes
	(50/60Hz)

COMPONENT IN

VIDEO AUDIO

Y PB PR L R

12

EXTERNAL EQIPMENT SETUP

Connecting a set-top box with an HDMI cable

Connect the HDMI output of the digital set-top box to the

1HDMI/DVI IN, HDMI/DVI IN 1, HDMI IN 2 or HDMI IN 3 jack on the TV.

2Turn on the digital set-top box.

(Refer to the owner’s manual for the digital set-top box.)

3Select HDMI/DVI, HDMI1, HDMI2 or HDMI3 input source using the INPUT button on the remote control.

HDMI/DVI IN

1

21

Downloaded From TV-Manual.com Manuals