LG Electronics 42LC4 Programming the Remote Control, Programming Code, Test your remote control

APPENDIX

PROGRAMMING THE REMOTE CONTROL

The remote is a multi-brand or a universal remote. It can be programmed to operate most remote-con- trollable devices of other manufacturers.

Note that the remote may not control all models of other brands.

APPENDIX

Programming a code into a remote mode

1Test your remote control.

To find out whether your remote control can operate the component without programming, turn on the component such as a VCR and press the corresponding mode button (such as a DVD or VCR) on the remote control, while pointing at the component. Test the POWER and PR + / - buttons to see if the component responds properly. If not, the remote requires programming to operate the device.

2Turn on the component to be programmed, then press the corresponding mode button (such as a DVD or VCR) on the remote control. The remote control button of desired device is lighted.

3Press the MENU and MUTE buttons simultaneously, the remote control is ready to be programmed for the code.

4Enter a code number using the number buttons on the remote control. Programming code numbers for the corresponding component can be found on the following pages. Again, if the code is correct, the device will turn off.

5Press the MENU button to store the code.

6Test the remote control functions to see if the component responds properly. If not, repeat from step 2.

PROGRAMMING CODE

DVD

Brand	Codes			Brand	Codes		Brand	Codes
APEX DIGITAL	022			MITSUBISHI	002		RCA	005	006
DENON	020	014		NAD	023		SAMSUNG	011	015
GE	005	006		ONKYO	008	017	SONY	007
HARMAN KARDON		027		PANASONIC	003	009	THOMPSON	005	006
JVC	012			PHILIPS	013		TOSHIBA	019	008
LG	001	010	016 025	PIONEER	004	026	YAMAHA	009	018
MAGNAVOX	013			PROCEED	021		ZENITH	010	016 025
MARANTZ	024			PROSCAN	005	006

104