LG Electronics 42PG69, 50PG69 owner manual Programming the Remote Control, Programming Code

Page 105

PROGRAMMING THE REMOTE CONTROL

The remote control is a multi brand or universal remote. It can be programmed. to operate most remote controlled devices from other manufacturers.

Note that the remote control may not control all models from other brands.

Programming a code into a remote mode

1Testing your remote control.

To find out whether your remote control can operate other components without programming, turn on a component such as a VCR and press the corresponding mode button (such as a DVD or VCR) on the remote control, while pointing at the component. Test the POWER and PR + / - buttons to see if the component responds correctly. If the component does not operate correctly, the remote control requires programming to operate the device.

2Switch on the component to be programmed, then press the corresponding mode button (such as DVD or VCR) on the remote control. The remote control button of the desired device is illumintated.

3Press the MENU and MUTE buttons simultaneously, the remote control is ready to be programmed with the code.

4Enter a code number using the number buttons on the remote control.

Programming code numbers for the corresponding component can be found on the following pages. If the code is correct, the device will turn off.

5Press the MENU button to store the code.

6Test the remote control functions to see if the component responds correctly. If not, repeat from step 2.

PROGRAMMING CODE

DVD

Brand

Codes

 

Brand

Codes

Brand

Codes

 

 

 

 

 

 

 

 

 

 

APEX DIGITAL

022

 

 

MITSUBISHI

002

 

RCA

005

006

DENON

020

014

 

NAD

023

 

SAMSUNG

011

015

GE

005

006

ONKYO

008

017

SONY

007

 

HARMAN KARDON

 

027

 

PANASONIC

003

009

THOMPSON

005

006

JVC

012

 

 

PHILIPS

013

 

TOSHIBA

019

008

LG

001

010

016 025

PIONEER

004 026

YAMAHA

009

018

MAGNAVOX

013

 

 

PROCEED

021

 

ZENITH

010

016 025

MARANTZ

024

 

 

PROSCAN

005

006

 

 

 

APPENDIX

103

Image 105
Contents Plasma TV Page Accessories Contents Contents Preparation Home MenuDVR EPG TV MenuFront Panel Controls PowerBack Panel Information Please SET IT UP Carefully SO the Product DOESN’T Fall Over Back Cover for Wire Arrangement How to remove the cable management clipInstall the Cable Management Clip as shown Circuit Breaker EarthingWall Antenna Socket Antenna ConnectionTurn on the digital set-top box HD Receiver Setup480i/576i Yes 480p/576p 720p/1080iConnecting a set-top box with an Hdmi cable Connecting with a Hdmi to DVI cableExternal Equipment Setup Connecting with a component cable DVD SetupConnecting with a Euro Scart cable Connecting with a S-Video cableConnect the Euro scart socket of the DVD to the AV1 Insertion of CI Module Connecting the Hdmi cableConnecting with a RF cable VCR SetupConnecting with an RCA cable Connecting with a Euro ScartAny Euro Scart cable used must be signal shielded ExternalDigital Audio OUT Setup Camcorder Other A/V Source SetupConnecting with a D-sub 15 pin cable PC SetupTo enjoy vivid picture and sound, connect the PC to the TV Rgbpc / Hdmipc mode Hdmidtv mode Auto adjustment again Screen Setup for PC modeConfig On screenPhase This function allows you to remove any horizontal This function works in the following mode RgbpcVisible on the screen background the horizontal Screen size will also changeExternal Selecting Wide XGA modeEquipment Initialising Reset to original factory settingsWatching TV / Programme Control Remote Control KEY FunctionsWatching TV /PROGRAMME Control Mode Selects the remote operating modesTurning on the TV Initializing setupProgramme Selection Volume AdjustmentAll countries On Screen Menus Selection and AdjustmentControl WatchingMation for the channel will be updated Manual Programme Tuning in Digital ModeProgramme list, the message Setup infor Continue? will appearPress the G button to enter the Programme Edit Programme Edit menuMenu Or E or F or G buttonMini Glossary Automatically switched off. will appear Booster in Digital Mode onlySelect O n or Off Short circuits, it will automatically return to OffWhen setting Software Update Software Update Digital Mode onlySelect Diagnostics Diagnostics Digital Mode onlyPress the G button to display Manufacturer Model/Type, Serial Number and Software VersionDigital pay services provider Press the G button and then OK buttonYour dealer Press the G button to select System. Select a TV Cast VPS Video Programme Service, PDCSystem with the F or G button Secam L/L’ FranceManual Programme Tuning in Analogue Mode Analogue Mode Fine Tuning in Analogue ModeProgramme Edit Analogue Mode Back DVR Menu Exit Guide Time Shift Digital Mode Analogue ModeDisplayed when Locked Programme Input Source Selection Simplink FunctionDisplayed in bright colour HDD Recordings playback control Recordings stored in HDDVideo Recorder DVR DigitalDVR Digital Video Recorder Using the TimeShift Mode functionPlayg Live TV Using the TimeShift Mode function, playGgggg DVR Digital Video RecorderInstant Recording REC is displayed. Use this feature to record up toInstant Record Hours of programmingREC 00000 When Manual Recording, this message is dis- played When recording, if the available storage space isNot sufficient, the recording will automatically Stop Button Function in Manual Record Mode Manual RecordingExit Home Recorded TV Programme ListPreview recorded list is shown above Recorded programme Selection and Popup MenuUse the PR + or PR button for page up/down navigation Function, this message is displayedPlaying recorded programmes Using the remote controlScreen PlaygChase playback FF or GG IFF or GGI Or GVideo Recorder Live TV Yellow Schedule ListBlue REDDVR Record QualityFormat Hard Disk Button Function in NOW/NEXT Guide Mode Switch on/off EPGSelect a programme GUIDE/EXIT TV/RADIORecord Button Function in 8 Days Guide ModeIcon Select Schedule Recording/ScheduleButton Function in Extended Description Box Button Function in Date Change ModeGreen GUIDE/EXITConflict pop-up Record PopupEXIT/BACK Popup Menu Record seriesTure horizontally, in linear proportion, to fill the entire Following selection will allow you to adjust the picScreenuseful for viewing 43 formatted DVDs Picture ControlZoom1 149Vivid Select this option to display a sharp image Standard Preset Picture SettingsTus Cinema Select this option to display a mild image User 1/2Auto Colour Tone Control Warm/Medium/Cool Manual Picture Adjustment Press the G button and then D or E button to select User Colour Tone User optionPress the G button and then D or E button to select Red Green or BlueAccording to the brightness of the reflection XD Contrast Optimises the contrast automaticallyColours Does not damage the original pictureDemo Press the G button to begin XD DemoTo stop XD Demo, press the Menu or Exit button Advanced Cinema High The black level of the screen gets brighter Low The black level of the screen gets darkerPress the G button to initialise the adjusted value Picture ResetImage Sticking Minimization ISM Method LOW-POWER Picture Mode Sound & Language Control Auto Volume LevelerListening to music Preset Sound SETTINGS-SOUND ModeSound LanguageAdjusting the audio equalizer Sound Setting Adjustment -USER ModeBalance TV Speaker TV Speakers ON/ OFF SetupSound Selecting Digital Audio OUTStereo/Dual Reception In Analogue Mode Only Speaker Sound Output Selection Nicam Reception In Analogue Mode OnlyPress the O K button If you want to change Language/ Country selectionLanguage Control Display Status Not Available Mpeg Audio Dolby Digital AudioStatus Not Available Teletext Subtitle Time Setting Clock SetupAuto ON/OFF Timer Setting Auto SHUT-OFF Setting Time SettingSleep Timer Setting Time Zone SetupParental Control / Rating SET Password & Lock SystemList Parental ControlTeletext Press the i button to select the index UpdateReveal TimeDigital Teletext Troubleshooting Remote control does Not work Power is suddenly Turned offAppendix Signal is out of range Check Hdmi cable over version Check USB cable over versionInvalid format Vertical bar or stripe on Background Cleaning the Screen MaintenanceAppendix Product SpecificationsProgramming the Remote Control Programming a code into a remote modeProgramming Code VCR IR Codes Single pulse, modulated with 37.917KHz signal at 455KHz1st frame Repeat frameUp D PR +Down E Right GGND External Control Device SetupRXD TXD GND DTR DSR RTS CTS SubPress Exit button to return to normal TV viewing Set IDTransmission / Receiving Protocol Command Reference ListKa Set ID FFCr Set ID OKDatax To show Power On/OffKc Set ID DataCr Normal screenKm Set ID DataCr Data 00 Lock off Kl Set ID DataCr Data 00 OSD offKu Set ID DataCr Data 00 Cool 01 Medium 02 Warm 03 User $ Set ID OKDataxKz Set ID FF Cr Data FF Read Abnormal State Command 2 z To recognize an abnormal stateJq Set ID Data Cr Data 00 Off 01 On Js Set ID DataCr Data Min 01 ~ MaxJu Set ID DataCr Data 01 To set Auto Configure Command 1 j, Command 2 uMc Set ID DataCr Data Key code Refer to Xb Set ID DataCr Data Structure

50PG69, 42PG69 specifications

LG Electronics, a pioneer in the electronics industry, has made significant strides in the realm of plasma television technology with models like the LG 42PG69 and 50PG69. These televisions are designed to cater to the demands of modern viewers by integrating advanced features and technologies that enhance the overall viewing experience.

The LG 42PG69 and 50PG69 boast impressive display technologies. Both models utilize a plasma display panel (PDP) that provides deep blacks and vibrant colors, thanks to their ability to control individual pixels for stunning contrast levels. The high-definition resolution of 1080p ensures that viewers can enjoy crystal-clear pictures, making both models ideal for watching movies, playing video games, or enjoying sports.

One of the standout features of these models is their 600Hz sub-field driving technology. This technology significantly reduces motion blur, enabling smooth playback during fast-moving scenes, which is a crucial aspect for sports and action films. Additionally, the televisions incorporate LG’s Real Cinema technology, which enhances the viewing experience by providing a more cinematic look and feel to films.

For connectivity, the LG 42PG69 and 50PG69 are equipped with multiple HDMI inputs, allowing users to connect various devices such as Blu-ray players, gaming consoles, and sound systems. USB ports are also included, making it easy to enjoy multimedia content directly from flash drives. This versatility ensures that users can easily access a wide range of content without hassle.

In terms of audio, the TVs come with built-in speakers that deliver decent sound quality, but for an enhanced audio experience, users can connect external sound systems via the optical audio output. Furthermore, both models support various audio formats, ensuring compatibility with a range of sound systems.

Energy efficiency is another important characteristic of the 42PG69 and 50PG69. LG is committed to environmental sustainability, and these models are designed to consume less power compared to previous plasma TVs, making them a more eco-friendly choice.

In summary, the LG 42PG69 and 50PG69 are exceptional plasma televisions that combine impressive display technologies with modern connectivity options. With features like 600Hz sub-field driving for smoother motion, high-definition resolutions, and energy efficiency, both models stand out as reliable options for anyone seeking to enhance their home entertainment experience. LG Electronics continues to lead the way in delivering innovative technologies that meet the evolving needs of consumers.