LG Electronics 42LBX, 47LBX HD Receiver Setup, When connecting Component cable, How to connect

EXTERNAL EQUIPMENT SETUP

HD RECEIVER SETUP

This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.

This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for Digital Contents.

EXTERNAL EQUIPMENT

When connecting Component cable

1.How to connect

1 Connect the video outputs (Y, PB, PR) of the digital set top box to the COMPONENT IN VIDEO 1 jacks on

the set. Match the jack colors

(Y = green, PB = blue, and PR = red).

(RGB/DVI)	CONTR
COMPONENT IN	RS-2
	(CONTROL

2

1

VIDEO AUDIO S-VIDE

SETUP

2	Connect the audio output of the digital set-top box to
	the COMPONENT IN AUDIO 1 jacks on the set.	1	2

2.How to use

■Turn on the digital set-top box.

(Refer to the owner’s manual for the digital set-top box.)

■Select Component 1 input source with using the INPUT button on the remote control.

Y PBPRL R

■If connected to COMPONENT IN 2 input, select

Component 2 input source.			Supported Display Specifications (Y, CB /PB, CR /PR)
			Resolution	Horizontal	Vertical
Signal	Component 1/2 HDMI/DVI1, 2 or 3			Frequency (KHz)	Frequency (Hz)
				15.73	60.00
480i	Yes	No	720x480i
				15.73	59.94
480p	Yes	Yes
720p	Yes	Yes	720x480p	31.47	59.94
				31.47	60.00
1080i	Yes	Yes
1080p	Yes	Yes	1280x720p	45.00	60.00
				44.96	59.94
			1920x1080i	33.75	60.00
				33.72	59.94
				67.50	60.00
				67.432	59.939
			1920x1080p	27.00	24.00
				26.97	23.94
				33.75	30.00
				33.71	29.97

14