When connecting with a S-Video cable
1Connect the
2Connect the audio outputs of the DVD to the AUDIO input jacks on the set.
3Turn on the DVD player, insert a DVD.
4Select AV3 input source with using the INPUT button on the remote control.
5Refer to the DVD player's manual for operating instructions.
DVD
(R) AUDIO (L)
2 1
RGB IN
RGBAUDIO
(PC/DTV) (RGB/DVI)
AV IN 3
(CONTROL&SERVICE)
(MONO)
S- VIDEO AUDIO
When connecting with a HDMI cable
HDMI IN
CONNECTIONS
1Connect the HDMI output of the DVD to the HDMI IN jack on the set.
2Select HDMI1/DVI or HDMI2 input source with using the INPUT button on the remote control.
3Refer to the DVD player's manual for operating instructions.
REMOTE CONTROLIN
2
1 (DVI)
1
& SETUP
DVD
HDMI OUTPUT
!NOTE
GTV can receive the video and audio signal simultaneously with using a HDMI cable.
GIf the DVD supports Auto HDMI function, the DVD output resolution will be automatically set to 1280x720p.
GIf the DVD does not support Auto HDMI, you need to set the output resolution appropriately. To get the best picture quality, adjust the output resolution of the DVD to 1280x720p.
21