LG Electronics 26 LC5*, 37 LC5*, 26LC4*, 32 LC5*, 32 LC4* owner manual 114

APPENDIX

22. Auto Configure

(Command 1 : j, Command 2 : u)

G To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode.

Transmission

[j][u][ ][Set ID][ ][Data][Cr]

Data 1: To set

Ack

[u][ ][Set ID][ ][OK/NG][Data][x]

23. Channel Select Command (Command 1 : m, Command 2 : a)

G Select channel to following physical number.

Transmission

[m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][Cr]

Data0 :High channel data Data1 :Low channel data

ex. No. 47 -> 00 2F (2FH) No. 394 -> 01 88 (188H), DTV No. 0 -> Don’t care

Data2 0x00 : ATV Main 0x10 : DTV Main

Channel data range

Analogue - Min: 00 ~ Max: 63 (0~99)

Digital - Min: 00 ~ Max: 3E7 (0~999)

Ack

[a][ ][Set ID][ ][OK/NG][Data][x]

Data Min: 00 ~ Max: 7D

	24. Send IR Code
		(Command 1 : m, Command 2 : c)
	G To send IR remote key code.
	Transmission
APPENDIX
	[m][c][ ][Set ID][ ][Data][Cr]
	Data		Key code - Refer to page 107.
	Ack
	[c][		][Set ID][ ][OK/NG][Data][x]

25. Input select (Command 1 : x, Command 2 : b) (Main Picture Input)

G To select input source for main picture.

Transmission

[x][b][ ][Set ID][ ][Data][Cr]

Data Structure

MSB										LSB
0		0	0	0	0		0		0	0
	External Input					Input Number
	External Input						Data
0		0	0	0				DTV
0		0	0	1			Analogue
0		0	1	0				AV
0		0	1	1			Component
0		1	0	0				RGB
0		1	0	1			HDMI
	Input Number						Data
0		0	0	0			Input1
0		0	0	1			Input2
0		0	1	0			Input3
0		0	1	1			Input4

Ack

[b][ ][Set ID][ ][OK/NG][Data][x]

114