LG Electronics 32LX50C 32LX50CS 37LC50C owner manual Programming the Remote Control

APPENDIX

PROGRAMMING THE REMOTE CONTROL

The provided universal remote control can be programmed to operate most remote-controllable devices.

Note that the remote may not control all models of other brands.

APPENDIX

Programming a code into a remote mode

1To find out whether your remote control can operate each device without programming, turn on the device (such as a VCR) and press the corresponding mode button on the remote.

After that, press the POWER button. If the device is turned off and it responds properly the remote control need not be programmed. If not, the remote should be programmed to operate the device. The program- ming procedures are explained below.

2Press the MENU and MUTE button continuously at the same time for two seconds; the currently selected device button is illuminated.

If you don't press any button for 20 seconds, the light on the mode button will be turned off. In that case, you have to repeat from step 2.

3Enter the appropriate code from the code table on the following pages. When pressing the button, the light blinks at a time. If the device turned off, the programming is successful.

4Press the MENU button to store the code. After blinking twice, this code is stored.

5Test the remote control functions to see if the device responds properly. If not, steps 2-5.

Remote Control Code

DVD

Brand	Codes			Brand	Codes		Brand	Codes
APEX DIGITAL	022			MITSUBISHI	002		RCA	005	006
DENON	020	014		NAD	023		SAMSUNG	011	015
GE	005	006		ONKYO	008	017	SONY	007
HARMAN KARDON		027		PANASONIC	003	009	THOMPSON	005	006
JVC	012			PHILIPS	013		TOSHIBA	019	008
LG	001	010	016 025	PIONEER	004	026	YAMAHA	009	018
MAGNAVOX	013			PROCEED	021		ZENITH	010	016 025
MARANTZ	024			PROSCAN	005	006

84