LG Electronics 32LG5*** Maintenance, To View the Users Guide on the CD-ROM, Troubleshooting

APPENDIX

MAINTENANCE

Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV. Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning.

Cleaning the Screen

1A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it is almost dry, and then use it to wipe the screen.

2Ensure there is no excess water on the screen. Allow any water or dampness to evaporate before switching on.

Cleaning the Cabinet

ATo remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.

ADo not to use a wet cloth.

Extended Absence

CAUTION

G If you expect to leave your TV dormant for prolonged periods (such as a holiday), unplug the power cord to protect against possible damage from lightning or power surges.

TO VIEW THE USER'S GUIDE ON THE CD-ROM

To view the User's guide on the CD-ROM, Adobe Acrobat Reader must be installed on your PC. The "ACRORD" folder on the CD-ROM contains the installation program for Acrobat Reader.

If you want to install Acrobat Reader, Open "My Computer" Open the folder "LG"Open the folder "ACRORD" double-click your language.

To view the User's guide

The User's guide files are included in the supplied CD-ROM. Load the supplied CD-ROM into the CD-ROM drive of your PC.

After a while, the web page of the CD-ROM will open automatically.(Windows users only) If the web page does not appear automatically, open the User's guide file directly.

Open "My computer" Open the folder "LG" Double click the "index.htm" file.

TROUBLESHOOTING

The TV does not operate properly.

ENGLISH

The remote control

does not work

Power is suddenly

turned off

ACheck to see if there is any object between the TV and the remote control causing an obstruction. Ensure you are pointing the remote control directly at the TV.

AEnsure that the batteries are installed with correct polarity (+ to +, - to -).

AEnsure that the correct remote operating mode is set: TV, VCR etc.

AInstall new batteries.

AIs the sleep timer set?

ACheck the power control settings. Has the Power supply been interrupted.

AIs Auto sleep activated on this station?