LG Electronics 3230 External Equipment Setup, HD Receiver Setup, How to connect, How to use

MFL34797048-en-4 3/18/08 7:27 PM Page 21

EXTERNAL EQUIPMENT SETUP

■To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.

■This part of EXTERNAL EQUIPMENT SETUP mainly use picture for 37/42/47/52LG50.

HD RECEIVER SETUP

This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.

Component Connection

1. How to connect

Y PBPRL R

Connect the video outputs (Y, PB, PR) of the digital set-

1 top box to the COMPONENT IN VIDEO 1 jacks on the TV. Match the jack colors (Y = green, PB = blue, and PR = red).

	2	Connect the audio output of the digital set-top box to	1	2
		the COMPONENT IN AUDIO 1 jacks on the TV.	RGB IN		DIGI
				AUDIO REMOTE
			RGB(PC)		OPT
				(RGB/DVI) CONTROL IN
2. How to use
■ Turn on the digital set-top box.					RS-232
			2	(CONTROL &
	(Refer to the owner’s manual for the digital set-top box. operation)
■	Select the Component 1 input source on the TV using		B	R
	the INPUT button on the remote control.		1
			VIDEO	AUDIO
■ If connected to COMPONENT IN2 input, select the					S-VIDE
			COMPONENT IN

Component 2 input source on the TV.

i.e) 37/42/47/52LG50

Supported Resolutions

			Y, CB/PB, CR/PR
Signal	Component	HDMI
			Resolution	Horizontal	Vertical
				Frequency(KHz)	Frequency(Hz)
480i	Yes	No
480p	Yes	Yes		15.73	59.94
			720x480i
				15.73	60.00
720p	Yes	Yes
				31.47	59.94
1080i	Yes	Yes	720x480p
				31.50	60.00
1080p	Yes	Yes
				44.96	59.94
			1280x720p
				45.00	60.00
			1920x1080i	33.72	59.94
				33.75	60.00
				26.97	23.976
				27.00	24.00
			1920x1080p	33.71	29.97
				33.75	30.00
				67.432	59.94
				67.50	60.00

EXTERNAL EQUIPMENT SETUP

21