LG Electronics 32LC2DU owner manual Screen Setup for PC mode

Installation

Screen Setup for PC mode

-When RGB connect to PC input and select the RGB-PC, this function is used.

-When HDMI/DVI connect to PC input and select HDMI/DVI input, this function is used.

-After connecting RGB-PC or HDMI/DVI to PC input and checking the screen quality.

*Adjustment for screen Resolution, Position, Size, and Phase

4	5	6
7	8	9
	0	FLASHBK
EZ PIC EZ SOUND	SAP	CC

ADJUST

ADJUST

Mini Glossary

Position This function is to adjust picture to left/right and up/down as you prefer.

Size	This function is to minimize
	any vertical bars or stripes
	visible on the screen back-
	ground. And the horizontal
	screen size will also
	change.
Phase	This function allows you to
	remove any horizontal noise
	and clear or sharpen the
	image of characters.

Resolution This function allows you select Resolution of XGA/WXGA.

1	Press the ADJUST button and then use D / E button to select
	Resolution, POSITION, SIZE, or PHASE.
2	Press ENTER button and then use D / E / F / G buttons to
	make appropriate adjustments.
	• The PHASE adjustment range is -16 ~ +16.
	(In HDMI/DVI-PC mode, PHASE is not available.)
	• The SIZE adjustment range is -30 ~ +30.
	(In HDMI/DVI-PC mode, SIZE is not available.)
3	Press ENTER button.

*When you change the resolution, select the proper resolution in present input to see the best picture appearance.

* Initializing (Reset to original factory values)

1	2	3
4	5	6
7	8	9
	0	FLASHBK
EZ PIC EZ SOUND	SAP	CC
ADJUST

ADJUST

- To initialize the adjusted values

1

2

3

Press the ADJUST button and then use D / E button to select the RESET option.

Press ENTER button and then use F / G button to select Yes.

Press ENTER button.

28