LG Electronics owner manual When connecting with a Hdmi to DVI cable

Installation

When connecting with a Component cable

Digital Set-top Box

B R (R) AUDIO (L)

			1	2
AV OUT
	(MONO)
VIDEO	AUDIO	S-VIDEO	VIDEO	AUDIO
	AV IN 1		COMPONENT IN

1Connect the video outputs (Y, PB, PR) of the digi- tal set-top box to the COMPONENT IN VIDEO jacks on the set.

2Connect the audio output of the digital set-top box to the COMPONENT IN AUDIO jacks on the set.

3Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)

4Select Component 1 input source with using the INPUT button on the remote control.

-If connected to COMPONENT 2, select Component 2 input source.

Signal	Component1/2	RGB-DTV, HDMI/DVI
480i	Yes	No
480p/720p/1080i	Yes	Yes

When connecting with a HDMI to DVI cable

		RGB IN	REMOTE
			CONTROL IN
HDMI/DVI IN	DIGITAL AUDIO	RS-232C IN
	OUT	(CONTROL&SERVICE)
	OPTICAL	AUDIO (RGB/DVI)
		RGB (PC/DTV)
	1	2

DVI-DTV OUTPUT (R) AUDIO (L)

Digital Set-top Box

1Connect the DVI output of the digital set-top box to the HDMI/DVI IN jack on the set.

2Connect the audio outputs of the set-top box to the AUDIO (RGB/DVI) jack on the set.

3Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)

4Select HDMI/DVI input source with using the INPUT button on the remote control.

•If the digital set-top box has a DVI output and no HDMI output, a separated audio connection is nec- essary.

•If the digital set-top box supports Auto DVI function, the output resolution of the digital set-top box will be automatically set to 1280x720p.

•If the digital set-top box does not support Auto DVI, you need to set the output resolution appropri- ately. To get the best picture quality, adjust the output resolution of the digital set-top box to 1280x720p.

27