INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING 11
INSTALLATION PROCEDURE
1Open the package and make sure all the accessories are included.
2Attach the stand to the TV set.
3Connect an external device to the TV set.
4Make sure the network connection is available.
You can use the TV network functions only when the network connection is made.
* When the TV is turned on for the first time after being shipped from the factory, initialization of the TV may take up to one minute.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.
CAUTION
f Do not use any unapproved items to ensure the safety and product’s lifespan.
f Any damages or injuries by using unapproved items are not covered by the warranty.
f Some models appear to have a thin film on the screen. It is actually part of the screen; do not remove it.
ENGLISH
NOTE
f The items supplied with your product may vary depending upon the model.
f Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.
f For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches) thick and 18 mm (0.7 inches) width.
f Use an extension cable that supports USB 2.0 if the USB cable or USB flash drive does not fit into your TV’s USB port.
B 
B 
A 
A
*A 
10 mm (0.39 inches) *B 
18 mm (0.7 inches)