EXTERNAL CONTROL DEVICE SETUP 11
22.3D(Command: x t) (only 3D models) (Depending on model)
►►To change 3D mode for TV.
Transmission [x][t][ ][Set ID][ ][Data 00][ ][Data 01] [ ][Data 02][ ][Data 03][Cr]
Data Structure
[Data 00] 00 : 3D On 01 : 3D Off
02 : 3D to 2D
03 : 2D to 3D [Data 01] 00 : Top and Bottom
01 : Side by Side
02 : Check Board
03 : Frame Sequential
04 : Column interleaving
05 : Row interleaving
[Data 02] 00 : Right to Left 01 : Left to Right
[Data 03] 3D Effect(3D Depth): Min : 00 - Max : 14 (*transmit by Hexadecimal code)
*If [Data 00] is 00 (3D On), [Data 03] has no meaning.
*If [Data 00] is 01 (3D off) or 02 (3D to 2D), [Data 01], [Data 02] and [Data 03] have no meaning.
*If [Data 00] is 03(2D to 3D), [Data 01] and [Data 02] have no meaning.
*If [Data 00] is 00 (3D On) or 03 (2D to 3D), [Data 03] works when 3D Mode (Genre) is manual only.
*All 3D pattern options ([Data 01]) may not be available according to broadcasting/video signal.
[Data 00] | [Data 01] | [Data 02] | [Data 03] |
00 | O | O | O |
01 | X | X | X |
02 | X | X | X |
03 | X | X | O |
|
|
|
|
X : don’t care
Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02] [Data03][x]
[t][ ][Set ID][ ][NG][Data00][x]
23.Extended 3D(Command: x v) (only 3D models) (Depending on model)
►►To change 3D option for TV. Transmission [x][v][ ][Set ID][ ][Data 00][ ] [Data 01][Cr]
[Data 00] 3D option
00 : 3D Picture Correction
01 : 3D Depth (3D Mode is Manual Only)
02 : 3D Viewpoint
06 : 3D Color Correction
07 : 3D Sound Zooming
08 : Normal Image View
09 : 3D Mode (Genre)
[Data 01] It has own range for each 3D option
determined by [Data 00].
1)When [Data 00] is 00
00: Right to Left
01: Left to Right
2)When [Data 00] is 01, 02
Data | Min: 0 - Max: 14 (*transmit by Hexadecimal |
| code) |
Data value range(0 - 20) converts Viewpoint range
*This option works when 3D Mode (Genre) is manual only.
3)When [Data 00] is 06, 07
00: Off
01: On
4)When [Data 00] is 08
00: Revert to 3D video from
01 : Change 3D video to 2D video, except
*If conversion condition doesn’t meet, command is treated as NG.
5) When [Data 00] is 09 |
|
| |
00 | : Standard | 01 | : Sport |
02 | : Cinema | 03 | : Extreme |
04 | : Manual |
|
|
Ack [v][ ][Set ID][ ][OK][Data00][Data01][x] [v][ ][Set ID][ ][NG][Data00][x]