Magic Remote Control Functions 31
Registering Magic Remote Control
The Magic Remote Control operates by pairing with your TV.
Please register the remote as follows.
How to register the Magic Remote Control
|
|
| To register automatically, turn the TV | |||
|
|
| on and press the | Wheel (OK). When | ||
|
|
| ||||
|
|
| registration is completed, the completion | |||
|
|
| message appears on the screen. | |||
(Wheel) | If registration fails, turn the TV off and | |||||
back on, then press the | Wheel (OK) to | |||||
|
|
| ||||
|
|
| complete registration. |
| ||
|
|
|
|
|
| |
How to Re-register the Magic Remote Control
BACK | 1 | Press and hold the | BACK and |
| SMART buttons together for 5 | ||
|
| ||
|
| seconds to reset, then register it by | |
|
| following “How to register the Magic | |
SMART 2 | remote control” above. | ||
To | |||
|
| press and hold the | BACK button for 5 |
|
| seconds toward the TV. | |
How to use Magic Remote Control
1 You can move the pointer by aiming the Pointer Receiver of the remote control at your TV then move it left, right, up or down.
»»If the pointer does not work properly leave the remote control for 10 seconds then use it again.
2 If the pointer disappears, move the remote control slightly to left or right. Then, it will automatically appear on the screen.
»»If the pointer has not been used for a certain period of time, it will disappear.
If you press 
Wheel (OK) on the Magic
1remote control, the screen appears.
Shows information about the current program and screen.
2You can select My Apps Menu.
Precautions to Take when Using the Magic Remote Control
yyUse the Magic remote control within the maximum communication distance (10 m, 32.8ft). Using the remote control beyond this distance, or with an object obstructing it, may cause a communication failure.
yyA communication failure may occur due to nearby devices. Electrical devices such as a microwave oven or wireless LAN product may cause interference, as these use the same bandwidth (2.4 GHz) as the Magic remote control.
yyThe Magic remote control may be damaged or may malfunction if it is dropped or receives a heavy impact.
yyTake care not to bump into nearby furniture or other people when using the Magic remote control.
yyManufacturer and installer cannot provide service related to human safety as the applicable wireless device has possibility of electric wave interference.
yyIt is recommended that an Access Point (AP) be located more than 1 m (3.28 ft) away from the TV. If the AP is installed closer than 1 m (3.28 ft), the Magic remote control may not perform as expected due to frequency interference.