34MAGIC REMOTE FUNCTIONS
ENGLISH
Registering Magic Remote
The Magic Remote operates by pairing with your TV.
How to register the Magic Remote
To use the Magic Remote, first pair it with your TV.
1 Put batteries into the Magic Remote and turn the TV on.
| 2 Point the Magic Remote at your TV |
(Wheel) | and press the Wheel (OK) on |
the remote control. |
••If the TV fails to register the Magic Remote, try again after turning the TV off and back on.
How to deregister the Magic Remote
Press the 
(BACK) and
(Home) buttons at the same time, for five seconds, to unpair the Magic
(BACK) Remote with your TV.
(Home) | ••Pressing and holding the |
(EXIT to LIVE) button will let | |
| you cancel and |
| Remote at once. |
Precautions to Take when Using the Magic Remote
••Use the Magic remote within the maximum communication distance (10 m, 32.8 ft). Using the remote control beyond this distance, or with an object obstructing it, may cause a communication failure.
••A communication failure may occur due to nearby devices. Electrical devices such as a microwave oven or wireless LAN product may cause interference, as these use the same bandwidth (2.4 GHz) as the Magic remote.
••The Magic remote may be damaged or may malfunction if it is dropped or receives a heavy impact.
••Take care not to bump into nearby furniture or other people when using the Magic remote.
••Manufacturer and installer cannot provide service related to human safety as the applicable wireless device has possibility of electric wave interference.
••It is recommended that an Access Point (AP) be located more than 1 m (3.28 ft) away from the TV. If the AP is installed closer than 1 m (3.28 ft), the Magic remote may not perform as expected due to frequency interference.
How to use Magic Remote
••Shake the Magic Remote slightly to the right and left or press 
(Home), 
, 
buttons to make the pointer appear on the screen. (In some TV models, the pointer will appear when you turn the Wheel button.)
••If the pointer has not been used for a certain period of time or Magic Remote is placed on a flat surface, then the pointer will disappear.
••If the pointer does not move as you wish, shake Magic Remote to the left and right. The pointer will move to the center of the screen.
••The Magic Remote depletes batteries faster than a normal remote due to the additional features.