English | Español | Français |
BEYOND THE BASICS
Adjustable features of the PERSONAL® music center II
You can change some factory default settings of the PERSONAL® music center II to customize it as you like.
Press the Setup button near the bottom of the PERSONAL® music center II to see a list of the feature settings you can change.
Note: To learn more about house codes, room codes, and audio streams, refer to the sections about these features.
To change settings for a feature
1.Tip the center bar down to move down the list in the Setup menu, and highlight the feature you want to adjust (Figure 13).
2.Press the right arrow button to move right for the setting options for the selected feature.
3.Tip the center bar up or down to move through the list and highlight the setting you want.
4.Press the center bar to confirm your choice.
5.Or, if you decide no change is needed, press the left arrow
button instead.
Figure 13
Music center II features that are adjustable
Features
Name
Following step 4 or 5 will exit the list of options and return to the features list.
Setup
Name: Bedroom
Room Code: B
Audio Stream: 2
Contrast: Default
Backlight Bright: 100%
Backlight: On
Back Open
Possible Settings
Default: Bedroom.
Designates where you use this PERSONAL® music center II.
Choose from a list of possible rooms to label your music center and distinguish it from any others.
21