Bose RC-35S2 manual Getting the remote ready, Installing the remote batteries

English

TAB 2 TAB 3 TAB 4 TAB 5 TAB 6 TAB 7 TAB 8

EXPANDING YOUR LIFESTYLE® SYSTEM

Getting the remote ready

1.Make sure your RC-35S2 remote and expansion product are set to the same room code.

The remote you received is set to room code B. If the expansion product is also set to room B, you do not need to do anything.

To change the remote control room code, see “Changing the room code” on page 8.

To change the room code in the expansion prod- uct, see the owner’s guide that came with it.

2.Make sure the house code in the RC-35S2 remote is the same as in your LIFESTYLE® V25/V35 home entertainment system.

Both products are initially set to house code 15 and should work together unless the house code in your main system was changed. To change the house code on the RC-35S2, see “Changing the house code” on page 9.

Note: For more information on changing the house code, see “Adding Sound to Another Room” in the operating guide for your LIFESTYLE® system.

Installing the remote batteries

1.Press and slide the battery cover off the back of the remote.

Four AAA (IEC LR3) batteries

2.Install the four supplied batteries, matching the polarity markings (+ and –) on the batteries to the markings inside the battery compartment.

3.Slide the battery cover back into place until it snaps closed.

3