LG Electronics DU-50PX10/10C Programming the Remote, Programming a code into a remote mode

Page 42

Programming the Remote

Programming the Remote

GThe remote control is a multi-brand or universal remote control. It can be programmed to operate most remote-controllable devices of other manufacturers.

Note that the remote control may not control all models of other brands.

Programming a code into a remote mode

1.Test your remote control.

To find out whether your remote control can operate the component without programming, turn on the component such as a VCR and press the corresponding MODE button (VCR) on the remote control, while pointing at the component. Test the POWER and CH +/- buttons to see if the component responds properly. If not, the remote requires programming to operate the device.

2.Turn on the component to be programmed, then press the corresponding MODE button on the remote control.

3.Press the MENU and MUTE buttons simultaneously, the remote control is ready to be programmed for the code.

4.There are two ways to find the right code for the component.

A.If you press the CH +/- buttons repeatedly, the codes will change one at-a-time. Press the POWER button after each code change. If the right code is found, the device will turn off.

B.Enter a code number using the number buttons on the remote. Programming code numbers for the corresponding component can be found on the following pages. Again, if the code is correct, the device will turn off.

5.Press the MENU button to store the code.

6.Test the remote control functions to see if the component responds properly. If not, repeat from step 2.

42 Plasma TV

Image 42

Contents Plasma TV LG Electronics U.S.A., IncFCC Notice Class B digital deviceSafety Instructions Important Safety InstructionsSafety Instructions Contents Introduction Controls Front Panel ControlsConnection Options Remote Control Key Functions Number buttonsThumbstick Up/Down/Left/Right/OK Remote Control InstallationAttaching the TV assembly to the wall TV bracketsInstallation Instructions To Install on a DesktopTo Mount on a Wall RF Coaxial Wire 75 ohm Analog and Digital TV signals provided on one antennaAnalog and DTV signals provided on two separate antennas External Equipment ConnectionsConnection Option VCR SetupCable TV Setup Cable BoxHow to use External A/V Source SetupHow to connect Monitor Out SetupHdstb Setup Digital Audio OutputDigital Set-top Box Resolution Horizontal Vertical FrequencyKHz FrequencyHz PC SetupMonitor Display Specifications RGB-PC / DVI-PC Mode 1024x768Initializing Reset to original factory values Screen Setup for PC modeAdjustment for screen Position, Clock, and Phase OperationTurning the TV On Turning on the TV just after installationTurning on the TV power cord is still connected On-screen Menus Language SelectionSetup Menu Options EZ Scan Channel SearchChannel Edit DTV Signal Strength Channel Label SetupMain Picture Source Selection Video Menu Options Color Temperature ControlVideo Preset EZ PictureEZ SoundRite Audio Menu OptionsAudio Language EZ SoundStereo/SAP Broadcasts Setup Manual Sound Control Off optionFront Surround TV Speakers On/Off Setup Press the G button and then use D / E button to select BBEReturn to the previous menu On/Off Timer Setup Auto Clock SetupManual Clock Setup For only On timer functionSleep Timer Auto OffOption Menu Features Aspect Ratio ControlAnalog Broadcasting System Captions Caption ModeCaption Digital Broadcasting System CaptionsCinema Mode Setup Caption OptionDemo Low Power Split Zoom DTV 720p, or 1080i mode onlyISM Image Sticking Minimization Method TV Rating Children Lock Menu OptionsChip rating and categories TV Rating GeneralParental Lock Setup Watching PIP/POP/Twin Picture Selecting an Input Signal Source for PIP/Twin PicturePIP Picture-In-Picture / POP / Twin Picture Swapping the PIP/Twin PicturePOP Picture-out-of-Picture Channel Scan Adjusting Main and Sub Picture Sizes for Twin PictureMoving the PIP sub picture Part at both the upType of Connector D-Sub 9-Pin Male External Control Device SetupRS-232C Setup RS-232C ConfigurationsCommunication Parameters Command Reference ListSet ID Transmission / Receiving ProtocolAspect Ratio Command2c Main picture format Power Command2aInput Select Command2b Main Picture Input Screen Mute Command2dSharpness Command2k Color Command2iTint Command2j OSD Select Command2lISM Method Command2p Color Temperature Command2uPIP Input Select Command2y White Wash Command2qHow to Connect Remote Control IR CodesIR Codes Code Hexa Function Programming a code into a remote mode Test your remote controlProgramming the Remote Programming Codes VCRsHdstb AudioTroubleshooting Checklist Cleaning the Screen Cleaning the CabinetExtended Absence LG ELECTRONICS, INC Plasma TV U.S. Limited Warranty This Limited Warranty does not Apply to No 3828VA0479D d