LG Electronics DU-42PY10X Moving the PIP sub picture, POP Picture-out-of-Picture Channel Scan

Operation

WMoving the PIP sub picture

In PIP mode, press the D / E / F / G button to move the sub picture to a different location on the screen.

WAdjusting Main and Sub Picture Sizes for Twin Picture

Use the D / E / F / G button to change main and sub picture sizes in Twin Picture mode.

i.e)	If screen is adjusted to the
	maximal size, the large
	screen is filled with entire
	screen vertically as shown.

WPOP (Picture-out-of-Picture: Channel Scan)

-Use POP to search the programs of all the memorized channels one-by-one on the 3 PIP screen display, (while the main picture source remains the current channel). The pictures of all the programmed channels are searched with the 3 POP screen.

-Notes:

•Run EZ Scan channel search before using POP mode.

•When Sub pictures are changed from the TV/DTV to CATV/CADTV in POP mode, it may make a noise from the Tuner switch.

1.Press the PIP button to activate the POP mode while in PIP mode.

•Channel selection: Use F button to enlarge the selected channel being searched on the PIP screen to shift it for viewing on the Main screen.

•PIP selection: Use D / E button to select one of 3 PIP screen pictures in POP mode.

•When watching TV on Main picture, TV or DTV on Sub pictures are in channel scanning. However, when watching DTV on Main picture, only TV on Sub picture is in channel scanning.

2.Press the EXIT button to cancel POP mode.

F ED	TV 2-0
	TV 4-0
	TV 6-0

Owner’s Manual 77