LG Electronics 71PY1M Set ID, Communication Parameters, Transmission / Receiving Protocol

External Control Device Setup

Set ID

-Use this function to specify a monitor ID number.

-Refer to ‘Real Data Mapping 1’. See page 38.

Language

Key lock

ISM Method

Low power

Set ID

Index

Language

Key lock

ISM Method

Low power

Set ID G

Index

1

1.Press the MENU button and then use the D / E button to select the SPECIAL menu.

2.Press the G button and then use D / E button to select Set ID.

3.Press the G button and then use F / G button to adjust Set ID to choose the desired monitor ID number.

• The adjustment range of Set ID is 1 ~ 99.

Communication Parameters

• Baud rate : 9600 bps (UART)	• Stop bit : 1 bit
• Data length : 8 bits	• Communication code : ASCII code

•Parity : None

							Transmission / Receiving Protocol
Command Reference List							Transmission
							[Command1][Command2][ ][Set ID][ ][Data][Cr]
		COMMAND 1 COMMAND 2			DATA
					(Hexadecimal)		* [Command 1]: k, j, m
	01. Power		k	a	0	~ 1	* [Command 2]: To control PDP set.
02.		Input Select	k	b	1	~ 9	* [Set ID]: You can adjust the set ID to choose desired moni-
							tor ID number in Special menu. Adjustment range
	03. Aspect Ratio		k	c	0	~ 3
							is 1 ~ 99. When selecting Set ID ‘0’, every con-
	04. Screen Mute		k	d	0	~ 1
							nected PDP set is controlled. Set ID is indicated
	05. Volume Mute		k	e	0	~ 1
							as decimal (1~99) on menu and as Hexa decimal
	06.	Volume Control	k	f	0	~ 64	(0x0~0x63) on transmission/receiving protocol.
	07.	Contrast	k	g	0	~ 64	* [DATA]: To transmit command data.
	08.	Brightness	k	h	0	~ 64	Transmit ‘FF’ data to read status of command.
09.		Color	k	i	0	~ 64	* [Cr]: Carriage Return
	10. Tint		k	j	0	~ 64	ASCII code ‘0x0D’
							* [ ]: ASCII code ‘space (0x20)’
	11. Sharpness		k	k	0	~ 64
	12. OSD Select		k	l	0	~ 1
13.		Remote Control Lock Mode	k	m	0	~ 1
	14. PIP/DW		k	n	0	~ 3	OK Acknowledgement
	15.	PIP Position	k	q	0	~ 3
							[Command2][ ][Set ID][ ][OK][Data][x]
	16. Treble		k	r	0	~ 64
							* The Monitor transmits ACK (acknowledgement) based on
	17. Bass		k	s	0	~ 64
							this format when receiving normal data. At this time, if the
18.		Balance	k	t	0	~ 64
							data is data read mode, it indicates present status data. If
	19.	Color Temperature	k	u	0	~ 2
							the data is data write mode, it returns the data of the PC
	20.	PIP Input Select	k	y	1	~ 9	computer.
	21. Abnormal State		k	z	0	~ a	Error Acknowledgement
	22. ISM Method		j	p	0	~ 3
	23.	Low Power	j	q	0	~ 1
							[Command2][ ][Set ID][ ][NG][x]
24.		Picture Size Setting	j	t	0	~oa
							* The Monitor transmits ACK (acknowledgement) based on
		for DW mode
							this format when receiving abnormal data from
	25. Auto Configure		j	u	1
							non-viable functions or communication errors.
	26. Key		m	c	Key code

Data 1: Illegal Code

2: Not supported function

36 Plasma Monitor