LG Electronics IPS226V owner manual Troubleshooting, Is the power indicator light on?

Page 24

Troubleshooting

Check the following before calling for service.

No image appears

Is the power cord of the display connected?

Is the power indicator light on?

Is the power indicator flickering?

Do you see an "OUT OF RANGE" message on the screen?

Do you see a "CHECK SIGNAL CABLE" message on the screen?

Check and see if the power cord is connected properly to the power outlet.

Press the Power button.

If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen.

Try to turn on the PC.

This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the 'Specifications' section of this manual and configure your display again.

This message appears when the signal cable between your PC and your display is not connected. Check the signal cable and try again.

Do you see a "OSD LOCKED" message on the screen?

Do you see “OSD LOCKED” when you push MENU button?

You can secure the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds: the message

“OSD UNLOCKED” will appear.

23

Image 24
Contents LCD Monitor Important Precautions On SafetyDo not Open the Display To Avoid Personal InjuryOn Installation On Cleaning On RepackingOn Disposal Accessories Thank for selecting LGE productsConnecting the Display Connecting and Disassembling the standPositioning your display ErgonomicConnecting with the PC Only Analog Mode Mode Button Control Panel FunctionsFront Panel Controls Menu ButtonPower Indicator Auto Image AdjustmentAuto Button Input ButtonOn Screen Display OSD Control Adjustment Screen AdjustmentOn Screen DisplayOSD Selection and Adjustment Volume OthersPicture Color Display SMART+ ModeMenu Name Icons Sub- menus Button TipMain menu Sub menu Description Brightness Contrast Sharpness Black LevelPreset ResetUser SIX Color HUEPhase HorizontalVertical ClockLanguage Power Indicator Reset LanguageWhite Exit Move Restart to select sub-menu Switch to full screen mode according to input image signal Menu Name Icons Sub SRGB Exit Exit Troubleshooting Is the power indicator light on?OSD Unlocked will appear Display image is incorrect Have you installed the display driver? Screen blinksSpecifications IPS236V Preset Modes Resolution IndicatorInstalling the Wall mount plate Install the Wall mount plate
Related manuals
Manual 32 pages 43.74 Kb