LG Electronics 15LC1R, 20LC1R owner manual TV Operation Overview, Menu Language Selection

Operation

Operation

TV Operation Overview

1.First, make all equipment connections. Plug the AC Adapter into the TV, then plug the AC Adapter into a power outlet. At this time, the TV is switched to standby mode.

•In standby mode, press the POWER, TV, CH (D,E), INPUT or number button on the remote con- trol or ON/OFF, CH (D,E), INPUT button located on the TV to turn the TV on.

2.Select the viewing source by pressing INPUT.

•Note: See page 18 if you have not auto programmed the TV to receive channels in your local broad- cast area.

3.After viewing, press the POWER button on the remote control or ON/OFF located on the TV. The TV reverts to standby mode.

NOTE

•If you want to turn the TV off, press the on/off button located on the TV. If you intend to be away on vacation, disconnect the power plug from the wall power outlet.

Menu Language Selection

-The menus can be shown on the screen in the selected language. First select your language.

1.Press the MENU button and then use D / E button to select the SPECIAL menu.

2.Press the G button and then use D / E button to select Language.

3.Press the G button and then use D / E button to select your desired language.

From this point on, the on-screen menus will be shown in the language of your choice.

4.Press the ENTER button to save.

17