Bush IDLCD2204HD instruction manual Intstallation, Installation Notes

Page 5

INTSTALLATION

INSTALLATION NOTES

This TV can be connected to AC 100-240 Volts. 50/60 Hz. Never connect to a DC supply or any other power supply.

Locate the TV in the room where light does not strike the screen . Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is

recommended for comfortable viewing.

Allow enough space between the TV and the wall to permit ventilation.

Avoid excessively warm locations to prevent possible damage to the cabinet or premature component failure.

Do not cover the ventilation openings when using the TV.

WALL MOUNTING INSTALLATION GUIDELINES

This television can be wall mounted as follows:

1.Place the LCD Television onto a solid surface. Please place some soft material to over the front of the screen to avoid any damage.

2.Remove the screws from the lower part of the television, where the base joins to the TV, and take away the stand (put the stand somewhere safe for future use).

3.Use the four screws provided to fix VESA standard holes on the back of

the TV onto a wall mounting bracket via the 4 the television.

100 mm

100 mm

-4-

Image 5
Contents INS T R UC T IO N MA NUA L Introduction Safety is importantContents Additional Safety Notes Safety InstructionsIntstallation Installation NotesFront Panel AccessoriesRear Panel InstallationKEY Board Antenna Connection Steps Connecting to PCPC Preset ResolutionVideo Equipment Connecting to AV EquipmentsBattery Installation Remote Control1POWERTo set the TV to standby or power on Basic Operation Turn on the Uint OperationSize EPG Electronic Programme Guide Channel Menu Menu OperationDelete Sound Menu Picture MenuTime Menu Default MenuLock Lock MenuProblem Check Picture Audio TroubleshootingsLCD Technical SpecificationsWarranty Ver 10-JAN-2009