TV FUNCTION
Basic Operation
1.Prepare the antenna and power connections (see the Getting Started section for details).
2.Press to turn the TV on.
3.Set your TV to the display the desired signal.
•Press to change between Digital TV tuning (ATSC) or Analog TV tuning (NTSC).
•Press to change between AV Input or Output modes (Component 1, Component 2, AV Out, etc.). You should see the desired signal
4.Press or to change the channel, or use the numeric keypad on the remote control to input a channel number directly.
Prior to viewing
the television to
System Setup Menu
Access the System Setup Menu to adjust the inter- nal options and features of your TV.
1. Press . The System Setup Menu will appear
2. Use the Navigation keypad ( or ) to select a setup menu category. Press to enter the selected setup menu.
• With a setup menu, press or to select (highlight) a desired option. Press to confirm the selection.
• Press or to adjust an option.
3.Press to return to a previous menu and to exit the System Setup Menu.
Picture Options Menu
Item | Description | |
|
| |
Mode | Select a Picture Mode preset (User, Standard, Movie, Sports) | |
Brightness | Adjust the brightness of the display. | |
Contrast | Adjust the contrast of the display. | |
Saturation | Adjust the color saturation of the display. | |
Tint | Adjust the tint of the display. | |
Sharpness | ATV Mode only: Adjust the sharpness of the display. | |
Noise Reduce | ATV Mode only: Select the Noise Reduction mode (Off, Lower, | |
Middle, Strong). | ||
| ||
Color Temp. | Adjust the color temperature of the display. |
Page 18 | Coby Electronics Corporation |
|
|