TV FUNCTION
Basic Operation
1.Prepare the antenna and power connections (see the Getting Started section for details).
2.Press 
to turn the TV on.
3.Set your TV to display the desired signal.
•Press 
to set the Input mode to DTV or TV. You should see the desired signal
•Select DTV for digital TV broadcasts (ATSC).
•Select TV for analog TV broadcasts (NTSC).
4.Press 
or 
to change the channel, or use the numeric keypad on the remote control to input a channel number directly.
Prior to viewing
the television to 
to enter the System Setup Menu, and then select “Channel > Auto Program”.
You may press 
to quickly change between Digital TV tuning (ATSC) or Analog TV tuning (NTSC).
System Setup Menu
Access the System Setup Menu to adjust the inter- nal options and features of your TV.
1. Press 
. The System Setup Menu will appear
2. Use the Navigation keypad (
or 
) to select a setup menu category. Press 
to enter the selected setup menu.
• With a setup menu, press 
or 
to select (highlight) a desired option. Press 
to confirm the selection.
• Press 
or 
to adjust an option.
3.Press 
to return to a previous menu and to exit the System Setup Menu.
Picture Options Menu
Item | Description |
|
|
Mode | Select a Picture Mode preset (User, Standard, Movie, Sports) |
Brightness | Adjust the brightness of the display. |
Contrast | Adjust the contrast of the display. |
Saturation | Adjust the color saturation of the display. |
Tint | Adjust the tint of the display. |
Sharpness | Adjust the sharpness of the display. |
Page 18 | Coby Electronics Corporation |
|
|