COBY electronic KTF-DVD 1093 operating instructions Ro e ootin, Time Setup, Search

TV Function

Time Setup

￿ ro￿ ￿ ￿e ￿ ￿ ootin￿

Should your DVD player develop a problem, please check below before requesting service:

	ITEM	DESCRIPTION
	Time Zone	Select the time zone.
		(Central, Mountain, Pacific, Alaska, Hawaii, Atlantic, Eastern).
	Daylight Saving	Set the time saving function on/off.
	Time
Option Setup
	ITEM	DESCRIPTION
	Menu Language	Setup the menu language.
	Color Mode	Setup the color mode. (Normal, Warm, Cool)
	Zoom Mode	Adjust the display mode. (Normal, 4:3).
	Restore Default	Restore settings to the factory default.
Channel Setup
	ITEM	DESCRIPTION

Symptom

No power

Does not play

No Picture

Check and Action

1.Make sure the unit has been powered on manually.

2.Check if the power cord has been properly connected to the power outlet.

3.Make sure the battery pack is fully charged.

1.No disc, load a disc.

2.Disc has been loaded upside down. Place the disc with the label side up.

3.Disc's rating level is higher than the player's setting.

4.Disc is incorrect type for the player.

5.Disc is damaged or dirty. Clean the disc or try another one.

6.Moisture may be condensed inside the player. Remove the disc and leave the unit power on for one or two hours.

1.Check if the system connection is proper and secure.

2.Check if the connection cables are damaged.

3.Clean the disc.

Antenna	Setup the antenna type as Air or CATV.
Auto Scan	Search channels automatically.
	Press the right direction button to start searching, press EXIT to quit.
Show/Hide	Skip the unwanted channels.
	Press the up/down direction button to select the channel, press OK to set	.
	Press OK again to release.
Favorite	Make the favorite channels collection.
	Press the up/down direction button to select the channel, press OK to set it as
	the favorite channel. Press OK again to release.
Channel No	Edit the channel label.
Channel Label	1. Select “Channel No”, press the left/right direction button to set the channel.
	2. Select “Channel Label”, press the right direction button to show the edit
	menu. In the menu, press the left/right direction button to move left/right,
	Press the up/down direction button to make changes.
	3. To clear the label, repeatedly press the up/down direction button to display
	the blank input.

Picture noisy/ distorted

No sound or sound output not complete

Remote control does not work

1.Disc is damaged or dirty. Clean the disc or try another one.

2.Reset the color system.

1.Check if the player has been switched on and correctly set.

2.Check if the system connections are secured.

3.Press AUDIO button to select other audio tracks of the disc.

4.Check if the MUTE function of the TV or amplifier has been activated.

5.There will be no sound output during REVERSE PLAY/PAUSE/SLOW and

SEARCH.

1. Make sure the unit is turned on. .

2.Remove the obstacles between the remote control and the player.

3.Point the remote control towards the remote sensor on the player.

4.Check if the batteries of the remote control have been loaded with correct polarities.

5.Replace the batteries of the remote control.

Malfunction	Should the player develop a malfunction, unplug the player for 30 minutes. After
	that, power on the player and the restore function should reset the player.

.17 . .18 .