Audiovox FPE4207HR manual Image Adjust for PC/Component Mode

Image Adjust for PC/Component Mode

- Be sure to select the correct source (Analog RGB or Component) before operation.

Image Adjust

1 Press MENU and then use 3or4to display IMAGE ADJUST menu page, press 6to enter.

2 Within the menu, use 5or6 to select, use 3or4 to adjust.

3 Press EXIT button to exit.

	IMAGE ADJUST
Image size
		FILL ALL
H position
V position
Frequency
Phase
Freeze Image
		OFF
H width
V width

050

047

000

000

005

005

	IMAGE ADJUST
Image size
		FILL ALL
H position
V position
Frequency
Phase
Freeze Image
		OFF
Auto Adjust	>>>

050

047

000

000

(IMAGE ADJUST menu in Component mode) (IMAGE ADJUST menu in PC mode)

Option Function

	Selects a desired image size (aspect ratio).
Image size	The choice may be different in different mode.(refer to <Setting Picture/Adjusting
	Image > section in TV mode for details.)
	Note: you may directly press ZOOM button on the remote control to select.
H position	Move the image on the screen left/right.
V position	Move the image on the screen up/down
Frequency	Adjusts the sample frequency.
Phase	Improves the focussing of stable image.
	Select "ON" to freeze the image on the screen. Select "OFF" to reactivate the image.
Freeze Image	Note: you may directly press FREEZE button on the remote control to freeze the image,
	press again to restore.
H width	Adjusts the horizontal width of the image.
(component mode only)
V width	Adjusts the vertical width of the image.
(component mode only)
Auto Adjust	Highlight "Auto Adjust" item and then use 3or4 button to start auto adjustment. The
(PC mode only)	set will automatically adjust the image such as frequency, position setting, etc.

37