SRS TruSurround XT Mode Settings
SRS TruSurround XT allows you to experience marvelous 'live'
Press [SRS].
Each press toggles between <Off>, <3D Mono> and <Stereo>.
1Press [MENU].
2 | Press [ | ] to move to <Sound>, then press [OK]. |
| ||
3 | Press [ | ] to move to <SRS TSXT>, then press [OK]. |
|
| |
4 | Press [ | ] to select a SRS TruSurround mode. |
| - <3D Mono> or <Stereo> will be selected. | |
| - Selecting <Off> will cancel SRS TruSurround XT mode. |
5Press [EXIT] to exit the menu.
TRADEMARK & LABEL LICENSE NOTICE
TruSurround XT, SRS and the mark are registered with SRS Lab, Inc.
All rights about TruSurround XT are under license to SRS Labs, Inc.
SRS TruSurround XT
■Off : Cancels SRS TruSurround XT mode.
■3D Mono : Sets SRS TruSurround XT to 3D mono.
■Stereo : Sets SRS TruSurround XT to stereo.
Digital Audio Output Settings
You can select your digital audio output as <Dolby Digital> or <PCM>.
ENGLISH
1Press [MENU].
2 | Press [ | ] to move to <Sound>, then press [OK]. |
| ||
3 | Press [ | ] to move to <Digital Output>, then press [OK]. |
|
| |
4 | Press [ | ] to move to <Dolby digital> or <PCM>, then press [OK]. |
|
5Press [EXIT] to exit the menu.
Dolby Digital
This product is under license of Dolby Laboratories.
Dolby and the
Useful Tips
☛<Dolby digital> can be selected while a digital broadcast is on or HDMI is connected.
☛HDMI can only be used when Dolby Digital audio is allowed. If not, PCM audio will be output regardless of what mode has been set.
☛PCM (Pulse Coded Modulation): A digital audio signal without compression. With optical output, your sound output will be used for AV amplifiers that do not support Dolby Digital 5.1 Channel sound.
29