Setting System (continued)
Setting System In YPbPr Mode
Adjusting Phase
1 | Press Menu to display the menu main page. |
2 | Press CH5/6 repeatedly to select System item. |
3 | Press Enter to access the submenu. |
| The Phase item will be highlighted automatically. |
4 | Press VOL+/- repeatedly to adjust the value. |
Adjusting Screen Aspect
MAIN MENU
Picture
Sound
CH
System
OSD
TVPC
Setup
Phase
Aspect Ratio
N/R
Default
40
1 | Press Menu to display the menu main page. | MAIN MENU |
| |
Picture |
| |||
Phase | ||||
|
| |||
2 | Press CH5/6 repeatedly to select System item. | Sound | Aspect Ratio | |
CH | N/R | |||
3 |
| Default | ||
Press Enter to access the submenu. | System | |||
| ||||
4 |
| OSD |
| |
Press CH5/6 repeatedly to highlight Aspect Ratio item. | TVPC | 16:9 | ||
5 | Press Enter repeatedly to select a desired aspect ratio. | Setup | ||
| ||||
|
|
For 480i or 480P signal format, you can select the image aspect ratio between 4:3, 16:9, Panorama and Zoom. For 720P or 1080i signal format, you can select the image aspect ratio between 4:3 and16:9.
Note:
You may quickly select the screen aspect by using the Screen button on the remote control.
Reducing Picture Noise
1 Press Menu to display the menu main page.
2 Press CH5/6 repeatedly to select System item.
3 Press Enter to access the submenu.
4 Press CH5/6repeatedly to select N/R item.
5 Press Enter repeatedly to select Off, Auto, Strong, Middle or Weak.
Loading Default Values
MAIN MENU
Picture
Sound
CH
System
OSD
TVPC
Setup
Phase
Aspect Ratio
N/R
Default
Auto
You may quickly load default values by using the Default item.
26