Audiovox FPE2306 manual Troubleshooting, Working temperature 5C to +40C

Symptoms

Check item

!This may be caused by obstruction to the antenna due to high

“Ghost” or double images

rise buildings or hills. Using a highly directional antenna may

improve the picture.

No power

!Check that the AC power cord is plugged into the mains

socket.

!Unplug the power cord, wait for 60 seconds. Then re-insert plug

!Check antenna connections at the rear of the unit to see if it

is properly connected to the unit.

!Possible broadcast station trouble. Try another channel.

No picture

!Adjust the contrast and brightness settings.

!Check the Closed Captions control. Some TEXT modes could

block the screen.

!Select a correct input.

!Is a non-compatible signal being input?

Good picture but no sound

!Increase the VOLUME.

!Check that the unit is not muted.

Good sound but poor color

!Adjust the contrast, color and brightness

!Sometimes, poor picture quality occurs when having

Poor picture

activated an S-VHS camera or camcorder connected and

having connected another peripheral at the same time. In this

case, switch off one of the other peripherals.

!Check whether the room is too bright.

!This may be caused by electrical interference (e.g. hairdryer,

Horizontal dotted line

nearby neon lights, etc.).

!Turn off the equipment.

!Check whether the batteries are working. Replace if

Television not responding to

necessary.

!Clean the remote control sensor lens on the unit.

remote control

!Do not use the remote control under strong or fluorescent

lighting.

Snowy picture and noise

!Check the antenna connection.

No stable or not

!Check if you have selected the correct D-Sub mode in your

synchronized D-Sub picture

No output from one of the speakers

!

Adjust Balance in the SOUND menu.

Control buttons do not work

!Unplug the power cord, wait for some seconds. Then re-plug

the power cord and turn on the unit again.

(Storage temperature: 0°C to +50°C

Working temperature: 5°C to +40°C )