Audiovox FPE1907DV owner manual Using Headphones, Unit Operation, Sound System

Page 19

USING HEADPHONES

Turn down the volume before connecting headphones to the unit, then adjust the

volume to your desired level.

• When headphones are connected, no sound will come from the front speakers.

Note:

• Avoid listening to sound at high levels for prolonged periods of time. This may be harmful to you and may cause hearing loss.

UNIT OPERATION

TURNING THE UNIT ON

When the AC power cord is connected, press the STANDBY/ON button on the top of the unit to turn it on. Press the FUNCTION button to select the desired mode (TV/AV IN/YUV IN/DVD/PC IN). If you select DVD, the DVD logo will appear on the screen.

Note: When the unit is not going to be used for a long time, disconnect the AC power cord from AC power outlet.

TURNING THE UNIT ON FOR THE FIRST TIME

The first time for you turning on the unit, the unit will enter Virgin mode. You can easily follow up prompt message on screen to finish basic settings of the system.

1.

Press the ENTER button to proceed the Initial Setup.

2.

Use the

/

button to select your OSD language, and press the

 

button to the next step.

3.Use the / button to select your TV tuner source (Antenna or Cable), and press the button to the next step.

4.Make sure RF aerial has been connected properly to TV ANTENNA input jack on the rear of

the system, press the ENTER or button. The system will automatically start to scan and preset all available TV channels.

5.After scaning finished, “Inital setup is Complete.” will appear on the screen. Press the ENTER button to finish Initial Setup.

After finishing above settings, the system will return to the first TV channel scaned just now.

SOUND SYSTEM

DOLBY DIGITAL (FOR DVD)

Dolby Digital is a sound system developed by Dolby Laboratories Inc. This unit automatically recognizes DVDs that have been recorded with Dolby Digital.

Not all Dolby Digital sources are recorded with 6 channels.

Some sources marked Dolby Digital may be recorded in Dolby Surround, a 2 channel system. Look for this logo on your unit.

Manufactured under license from Dolby Laboratories.

'Dolby' and the double-D symbol are trademarks of Dolby Laboratories.

19

PLV31190CS1-DC_IB_ENG_AUD.pmd

19

20/04/2007, 16:51

Image 19
Contents HD Flat Panel LCD TV with BUILT-IN DVD Player Condensation Information Safety PrecautionsPlacement Information Safety InformationSafety Precautions Important Safety Instructions Table of Contents Icons Used on Dvds Disc FormatsRegion Management Information Disc Function or Operation That is not AvailableTo Change the Remote Control Battery Remote ControlAccessories Using the Remote ControlNumber 0 9 and dot Buttons Remote Control Reference GuideFunction Button TOP, Front & Side View Unit Reference GuideBack & Bottom View Connecting an Analog Antenna or Device Connecting a TV ANTENNA/CABLE/SATELLITEConnecting AN Audio Amplifier Connecting a Digital AntennaConnect to a VCR Connecting to Devices with an S-Video OutputConnect to a camcorder Connections Connect to a VCR/PVR Connecting a PC Connecting a HIGH-DEFINITION HD SourceUsing the CAR Power Adapter Power SupplyUsing the AC Power Adapter Removing the Base Stand InstallationMounting on the Wall Unit Operation Using HeadphonesSound System CD/DVD Operation Sequence of angle shots Audio Selection DVDSubtitle Selection DVD Angle Selection DVDLocating a Specific Chapter / Track Special FunctionsDisplay Function DVD Locating a Specific Title DVDRepeat Playback CD/DVD Programmable MemoryRepeating a Specific Section DVD CD Playing a Picture File DiscPlaying a Picture File Disc Video Setup Language SetupSystem Setup AV / YUV / DVD Mode TV SetupPC Mode TV Mode AV / YUV / DVD / PC Mode VGA Settings in PC ModeMTS Channel Skip SettingChannel Skip, MTS or Audio Language. Adjust Enter orDate Time Setup SettingTV Mode AV / YUV / DVD Mode Time UpdateRestore Setting Caption SettingTV Mode Parental Control Setting Language Code List Cleaning the Disc MaintenanceDVD Trouble Shooting GuideTrouble Shooting Guide Unit Inch