Watching TV
Turning On/Off
Never attempt to move the TV unless the AC power cord has been disconnected.
Introducing Channel Number
Selecting Channels
Turning On
Firstly, Plug in the AC power cord to the AC outlet.
Press POWER
on the TV or press POWER
on the remote control.
The initial setup starts when the TV powers on for the first time. If the TV has been
turned on before, it displays current input signal directly.
Turning Off
Press POWER
on the TV or press POWER
on the remote control.
The TV enters standby mode and the image on the screen disappears.
The TV will still consume some power as long as the AC power cord is still inserted into the wall outlet.
If you are not going to use this TV for a long period of time, be sure to remove the AC power cord from the power outlet.
This television is capable of receiving the full range of
As the transition toward full digital TV continues, some
You can select analog channels in serveral ways.
Method 1 - Using CH+ or CH- on the remote control or on the TV
Press the CH+ or CH- to cycle among all available channels. Only those channels marked with a tick symbol can be selected by the CH+ or CH- button.
Method 2 - Using FLASHBACK 
on the remote control
Press FLASHBACK to switch to the previously tuned
channel.
Press FLASHBACK again to switch back to the currently
tuned channel.
Method 3 - Using
For analog TV channels
Press the
confirm with OK to select up to 125 channels for
VHF/UHF/CATV.
24