Basic Operations
Turning on
1 Connect the power correctly, then the red indicator lights up and the unit is in STANDBY mode.
2 Press the POWER ( 
)button on the remote control or on the unit to turn on the TV set.The indicator LED will turn to yellow.
Turning off
1 With the power on, press the POWER (
) button to turn off the TV and put the TV in STANDBY mode, the indicator LED will turn to red.
2 If you want to turn off the power completely, unplug the power cord from the wall outlet.
Note: Do not switch the on/off state of the unit quickly. The interval of the turning on and turning off should be more than 5 seconds.
Selecting input signal
1 Press the SOURCE button on the unit or
button on the remote control. The screen displays the menu as shown on the right.
2 Press CH5/6 to highlight your desired
input signal source. Press VOL+/- or wait
for about 4 seconds and the desired signal
SOURCE
TV
AV
SVIDEO
YPbPr/YCbCr
VGA
TV
Note: All buttons shown in the manual are located on the remote control unless otherwise indicated.
18