CD/DVD OPERATION
This owner’s manual explains the basic instructions of this unit. Some DVDs are produced to limit operation during playback. For example, many DVDs do not allow users to skip government warnings, or in some cases previews or other features. This is not a defect in the unit. Refer to the instruction notes of discs.
“
” may appear on the screen during operation. A “ 
” means that the desired operation is not permitted by the unit or disc.
Playing a Disc
1.Press the STANDBY/ON button to turn the unit on.
2.Press the FUNCTION button to select DVD mode.
See CUSTOMIZING THE DVD FUNCTION SETTINGS before proceeding to step 3.
3.Press the 
PUSH OPEN button to open the disc door.
4.Hold the disc by its edge and gently push it onto the spindle, with the label side facing the front, until you hear a “click”.
5.Push the disc door gently to close it. It takes a short while for your unit to load the disc. After loading, for most DVDs, the unit will automatically take you main menu or start playing. If the unit does not automatically start playing the DVD, press the 
PLAY button.
PLAYING A PICTURE FILE DISC
This unit can play picture files recorded on
1.Press the 
PUSH OPEN button to open the disc door.
2.Hold the disc by its edge and gently push it onto the spindle, with the label side facing the front, until you hear a “click”.
3.Push the door gently to close it. The picture files on the disc will be displayed one by one automatically.
4.Press the 
STOP button to go to the folder list.
5.Press the 
or 
button to highlight a file to play. Press the 
PLAY button to start playback.
Note:
•You can press the 
PAUSE button to interrupt playback, and press the 
PLAY button to resume playback.
•You also can use the GOTO function or use the numbered buttons to enter the image number to quickly select any image.
•Press the ANGLE button on the remote control to rotate the picture orientation by 90°.
Pausing playback (still mode)
Press the 
PAUSE button. To resume normal playback, press the
PLAY button. Each time you press the 
PAUSE button, the picture advances one frame.
Stopping playback
Press the 
STOP button at the location where you want to interrupt playback. To resume playback at the position where the disc was stopped, press the 
PLAY button.
If you press the 
STOP button twice, the unit’s memory will be cleared and pressing the 
PLAY button will reset the disc to the beginning.
SKIPPING TO A DIFFERENT TRACK
•Press the 
PREV button to go back to previous chapters/tracks.
•Press the 
NEXT button to advance chapters/tracks.
•For an Audio CD, use the number buttons (remote control only) to go directly to that track number.
E - 23
English | 6/11/2008 12:22:28 PM |