TV Setup and Operation
Preparations
1. After connection, press the POWER button to turn on the power. (If it is turned on, the power
indicator is blue.)
2. Press the SOURCE button to shift to TV mode. You can go on with the following operations:
Image Setting
Note: This item is only available when there is signal input.
Press the MENU button once to enter the setup menu, as shown on the right:
In the setup menu, press the ▲▼ button to select Image and then press the ENTER button to enter the item. Press the ▲▼ button to select. Press the MENU button to return to the previous menu.
Scheme Setup
Press the ▲▼ button to select Scheme and press the ENTER button to enter. Press the ▲▼button to select the desired item and press the ENTER button to confirm your selection. Press the MENU button to return to the previous menu.
Brightness Setup
Press the ▲▼ button to select Brightness and press the ◄► button to adjust the value. Press the MENU button to return to the previous menu.
- 18 -