TV Mode Operations
English Owner’s Manual
3)Press either the FM modulator frequency 1 button 9 or the FM modulator frequency 2 button 8.
*The FM modulator frequency is set as follows:
•FM modulator (FRQ1): 88.3 MHz
•FM modulator (FRQ2): 88.7 MHz
Adjusting the brightness and tone of color
1)Hold down the center of the joystick # for about 2 seconds.
The screen adjustment mode now appears.
*Start the adjustments while the adjustment dis- plays are on the screen. These displays will be automatically cleared after about 5 seconds.
2)Press the joystick # up (w) or down (z) to select what is to be adjusted, and then press it to the left (Å) or right (Î) to make the adjustment.
*The pointer which indicates the adjustment position moves one scale increment when ini- tially pushed once. It then moves one scale increment when it is pushed 5 times.
Note:
•There is no hue adjustment for the PAL TV sys- tem.
Brightness adjustment (BRIGHT)
Darker Lighter
Hue adjustment (HUE) More More
reddish greenish
Color intensity adjustment (COLOR)
Lighter Darker
How to connect the unit with a VTR
Notes:
•Before proceeding with the connections, make absolutely sure that the power of the unit and VTR (or video camera) has been turned off.
•Before proceeding with the connections, refer to the Instruction Manual of the unit which is to be connected.
VTR input | Audio output ternimal | |
ternimal | ||
Video output ternimal | ||
|
Note:
•You will need an AV connecting cord (CCA-
Watching a video tape
Refer to the Instruction Manual of the unit con- cerned for details on operating the video unit connected.
1)Press the TV/CD button 2 to select the TV mode.
2)Press the joystick # up (w) or down (z) to
select VTR.
Each time the joystick # is pressed up (w) or down (z), the setting is switched in the sequence shown below.
TV1
TV2 
VTR
Note:
•When a VTR has been connected to the sys- tem expansion terminals on the unit’s rear panel, the setting is switched in the sequence shown below.
TV1
TV2 
VTR1
VTR2
16 TVX5653