Standby Mode

to select the channel and press【V+】/【V-】to set lock/unlock.

A prompt appears when a locked channel is switched. The password needs to be entered to watch the program.

In Lock All mode, press【OK】/【V+】to lock all of the programs.

In Clear All mode, press【OK】/【V+】to unlock all of

the programs.

Note: In child lock menu operation, each function cannot be activated until the correct password is entered. If the password is forgotten, the default password of “1601” is still valid.

Using the PC Setting menu (for PC mode only)

1)Press【MENU】and then use【V+】/【V-】to select the desired field.

2)Press【P+】/【P-】to make the desired adjustment.

●Auto Tracking

To adjust automatically the picture’s clock,phase, H

Position and V Position to get the best visual effect.

●Phase

To adjust pictures’ sampling phase in PC mode

●Clock

To adjust pictures’ sampling frequency .

●H Position

To adjust picture’s position horizontally in PC mode.

●V Position

To adjust picture’s position vertically in PC mode. Note:

In the menu, gray items means invalid to operate in the current mode.

OTHER FUNCTIONS INTRODUCTION

Press【】on the TV panel/Remote Control, the LCD TV will store the current setup and enter into standby mode with a red indicator light. To Power on the LCD TV, press the button again.

Signal Switch

Press【AV】on the remote control to select the signal sources: TV, AV, AV1, AV2, YPbPr, PC and DVI.

The upper-right corner of the screen will display the corresponding information of the signal source.

PAGE 18