TV Overview
Removal of TV Pedestal | Wall Mounting |
For Wall Mounting | It is recommended that you call your |
To remove the pedestal from the | local TV dealer or a licensed contrac- |
television, unscrew the (5) Philips | tor to secure the television to the wall |
head screws and slide the TV upward | using suitable VESA 400 x 200mm |
while securing the base | wall mount hardware. |
TV REAR PANEL
|
|
|
|
|
| 2 | AV2 | |||||||||
|
|
|
|
|
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||
HDMI 3 | HDMI 2 | HDMI 1 |
|
| ||||||||||||
|
|
|
|
|
|
|
|
|
|
| 1 | AV1 | ||||
|
|
|
|
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 | 2 | 3 | 4 | 5 | 6 | 7 8 | 9 |
Rear Panel & Pedestal Removal
9
1.Master Power ON/OFF Switch - When the master power is switched OFF, the power button located on the remote control and right side of the television will not function. Make sure it is switched ON for regular TV viewing on a daily basis.
2.AC Power Plug - Insert power plug during initial setup.
3.HDMI Inputs (3) - Connects to digital AV equipment that feature HDMI connectivity. HDMI supports enhanced high definition video and
4.PC IN - VGA/Audio Input (3.5mm) - Connect an optional VGA cable from your personal computer and a 3.5mm audio cable for sound.
5.YPbPr 1/2 Inputs and R/L Audio Inputs (2) - Connect up to two (2) AV devices that feature component (YPbPr) video and audio output jacks.
6.AV 1/2 Inputs (2) - Connect up to two (2) standard AV devices to the composite VIDEO (Y) and AUDIO (L/R) output jacks found on most external video equipment.
7.
8.SPDIF - Connect an optional coaxial digital cable through a com- patible amp/receiver to enjoy superior audio sound.
9.RF Input - Connect antenna or cable for television reception.