TO USE THE REMOTE CONTROL
POWER
Press to power ON/OFF (standby) TV.(Note:1.TV is never completely power off.
unless physically unplugged. 2.Press to turn on TV after the power
on status LED had changed to the red color and stopped flashing. )
VIDEO
Press repeatedly to choose S- Video/
Composite source mode (Video 1 ~ 2)
COMP
Press repeatedly to choose Component
source mode (Video 3 ).
PC/HDMI
Press repeatedly to choose VGA or HDMI source mode (Video 4 ~ 6).
TV
Press to choose ATSC/NTSC TV source mode.
0 ~ 9 /- number
Press to enter TV channel number to select channel (Press
SLEEP
Press to set a time period (off/30min/60min/90min)after which the TV shouldswitch itself to standby mode.
FREEZE
Press to freeze the displayed picture
Press + or - to adjust the volume.
MENU
Press to open or exit menu.
“∧”,“∨”,“＜”,“＞”, “ENTER”
Press to adjust the various function items on the menu.
15
PREV CH
Press to display the previous TV .
MTS/SAP
Press to activate the NTSC TV sounds, such as: Stereo, SAP or Mono tone. And languages of DTV.
WIDE
Press to choose the display aspect as: Normal, Wide, Zoom or Cinema mode.
SOURCE
Press repeatedly to choose the various input sources (Video 1 ~ 6).
EPG
This function is not support.
MUTE
Press to set TVsound mute ON/OFF
DISPLAY
Press to show the information about the input source、TV channel、 display resolution and current time.
Press + or - to adjust the volume.
Exit
Press to exit menu or OSD.
V-CHIP
Press to lock / unlock Parental Control temporarily. (After setting the restricted table of MPAA or TV Rating.)
VIDEO ADJ
Press to choose the Brightness or Contrast adjustment.
AUDIO ADJ
Press to switch the ATSC multi- channel TV sounds.
CC
Press repeatedly to change the closed caption type as CC ON/CC
OFF/CC ON WHEN MUTE.
FAVORITE
Press to toggle the Favorite/Normal mode.