Atlas Sound FAP42T specifications FA42T-6MB, Features, Applications, General Description

STRATEGY SERIES® II 4" CEILING SPEAKER SYSTEMS	FAP42T
	FA42T-6MB

FAP42T

(included)

C-Ring/V-Rail

Mounting System

(optional)

FAP42-TR

FEATURES

•Extended low frequency response from the 285 cubic inch optimally tuned and ported deep drawn galvanized steel enclosure

•Easy installation in drop tile or sheetrock ceilings via C-ring/V-rail tile bridge and "dog leg" mounting system (Included)

•Front mounted tap selector switch for easy system tuning adjustments includes transformer bypass setting for 8 ohm direct coupled operation

•Unique "trap door" input section allows for through conduit runs with rigid or flex conduit

•4 Pole detachable "phoenix" style connector allows easy pre-wiring and is convenient for daisy chaining additional Strategy full range speakers or subwoofers

•"Press fit" grilles blend better into contemporary architecture

•Enhanced quality 70.7V/100V internal transformers minimize insertion loss and maintan low frequency response while providing increased output for higher SPL applications

•UL Listing Pending

APPLICATIONS

FAP42T combines superior coaxial loudspeaker performance with wide dispersion and easy installation. A low profile enclosure and wide coverage make the FAP42T a perfect choice for low ceilings. The FAP42T will satisfy the needs of owners, architects, contractors, and consultants by delivering true, high fidelity sound reproduction in an attractive and easy-to-install system. The FAP42T is ideal for high-intelligibility voice, music, and signal reproduction in commercial, industrial, and institutional applications.

GENERAL DESCRIPTION

The FAP42T’s 130 degree dispersion angle effectively reduces the number of loudspeakers

necessary to achieve coverage in distributed systems with low ceilings.

The loudspeaker component matches the performance of the legendary Atlas Sound Strategy FA Series. High quality construction 1" voice coil 4" coaxial cone type driver includes polypropylene cone with a butyl rubber surround. The 19mm coaxially mounted tweeter is constructed of PEI. A high sensitivity means less power may be required to achieve the desired SPL. This loudspeaker is factory assembled to an optimally tuned & ported deep drawn enclosure and includes a special- ly designed 16 watt low saturation 70.7V/100V transformer. A convenient front mounted selector switch allows tap selection without the need to remove the speaker from the ceiling. This switch also includes a transformer bypass setting for 8 ohm direct coupled operation.

MOUNTING ACCESSORIES

Mounting is simplified with Strategy style "dog leg" tabs that allow easy installation into drop tile or drywall ceilings with provided tile bridge assembly. The tile bridge consists of (2) "V" shaped formed mounting rails and a C-ring assembly. The C-ring can be attached to the rails with the screws provided to extend support to the t-bar grid in suspended ceiling applications. Multiple hole locations are provided to allow the C-ring to be positioned to the outer edge the tile if necessary.

For existing dry-wall applications the tile bridge c-ring and support rails can be inserted into the hole cut for the FAP42T. For easy positioning the "V" shaped support rails match the shape of the C-ring tabs for easy maneuvering and location when working "blindly" above the deck

A uniquely designed "easy access" input panel on the side of the enclosure allows for "thru" conduit runs using flexible or rigid conduit. Below this cover resides a detachable Phoenix style locking four-pole connector which provides for easy daisy chain wiring to other full range 70.7V loudspeakers or Atlas Sound FASUB70 subwoofers. The package includes an attractive press-fit grill which nicely matches contemporary architecture.

For new construction drywall ceiling applications, the optional FAP42-TR trim ring is available. This unit provides a marked location for drywall installers to cut around essentially reserving the desired location in the ceiling until final installation of FAP42T. Mounting holes are provided to accommodate 16" or 24" OC stud/joist mounting.

A support ring is also provided on the top of the FAP42T enclosure to facilitate an auxiliary sup- port cable. NOTE: IT IS MANDATORY THAT THIS SECONDARY SUPPORT BE UTILIZED IN DROP CEILINGS FOR SAFETY AND SEISMIC CONSIDERATIONS).

ONE

PEFORMANCE SPECIFICATIONS

MODEL

POWER

70.7V

FREQUENCY

SENSITIVITY

WOOFER

WOOFER

HF

DIMENSIONS

ENCLOSURE

CUT-OUT

WEIGHT-LESS

RATING

TAPS

RESPONSE (±7dB)

(1W/1M)

MAG WT.

DRIVER

VOLUME

DIMENSION

TILE BRIDGE

FAP42T

25 Watts

1, 2, 4,

75Hz-20kHz

88dB

4” Ploy Cone

10 oz

Coaxially Mounted

10.5” (267mm) Dia.

285 Cubic

9”

6.5 lbs.

(Transformer

8, 16

Average

Butyl Rubber

(364g)

PEI Dome

8.875” (225mm)

Inches

(229mm)

(2.95kg)

Limited)

Surround

Tweeter

Overall Height

Specifications subject to change without notice

TELEPHONE: (800) 876-3333 / FAX (800) 765-3435

AtlasSound.com

1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A.

© 2004 Atlas Sound

Printed in U.S.A.

000904

ATS001159 RevE 9/04

SL1-2009

2.25