TROUBLESHOOTING
SYMPTOM
CAUSE
SOLUTION
No power | No +12V accessory, No | Replace circuit fuse, monitor has protection |
| ground, | device |
|
| verify power is being supplied |
|
|
|
Video/No audio | White audio trigger wire | Connect to +12V ACC or reverse light circuit, |
| not powered, Volume adjust | turn volume adjustment up |
| down |
|
|
|
|
Monitor does not | Blue standby wire not powered | Connect to reverse circuit +12V |
activate in |
|
|
Standby reverse |
|
|
trigger |
|
|
|
|
|
Negative/dark | Low voltage, Brightness | Check voltage power and ground connections, |
video image | adjustment down | turn brightness adjustment up |
|
|
|
No video/no audio | Camera connection | Check camera input selection, connection to |
|
| camera and junction box, correct camera |
|
| connection/plugged incorrectly |
|
|
|
Vehicle battery | +12V ACC (red wire) | Provide +12V ACC (red wire) power from |
drained | connected to vehicle battery | switched circuit |
|
|
|
11