Akai LCT3226 manual Using the Geometric Menu

■Selecting Channel

1 Press CH+/- on the remote control to search the channels, the channel number will increase or decrease by 1 for each pressing excluding the skipped channels.

2Press number buttons 0~9 to select the corresponding channel content. If the channel number is bigger than 9, just press the two number buttons successively. If the channel number is bigger than 100, just press the three number buttons successively. The time interval should not exceed 2 seconds.

3If the channel number you pressed is bigger than the maximum channel number that the setting is permitted, the maximum numbered channel content will be remained.

■Channel Preview

Press RECALL button to switch between present channel and previous channel. (Only for TV)

5 Using the Geometric Menu

Option	Press /	Description
Contrast	0~100	Reduce/Enhance
Brightness	0~100	Darken/Brighten
Back Light	Middle, Bright, Dark	Adjust the balance of back light
Auto Setting		To adjust the position of
		display automatically
Phase	0~31	Soften/Sharpen
Manual Clock	0~255	Decrease/Increase
Display	Vertical position,	To adjust the position of
Adjustment	Horizontal position	display

Note:

1 If your current input source is “VGA” or “DVI”, push “MENU” enter into this menu. It is not available in other input source mode.

2 “Auto Setting”, “Phase”, “Manual Clock” and “Display Adjustment” item can be adjust when input source is “VGA”.

■ Using “Contrast”

(Continued on next page)

41