York H4CE180A40 installation instructions Supplemental Installation Instructions, Scope

035-17392-000 REV. A (0401)

SUPPLEMENTAL INSTALLATION INSTRUCTIONS

MODEL H4CE180A40 (380V-3-60 Hz Electrical Supply)

SPLIT-SYSTEM CONDENSING UNITS (EXPORT)

Scope

This installation Instruction Supplement provides information specific to Model H4CE180A40. For all other information regarding the installation and operation of this unit, refer to Installation Instruction Form 035-17384-000.

Approvals

As unit is for Export, it is not certified by ETL or CGA.

TABLE 3: Electrical Data

Model	Voltage	Power		Compressor			Condensing Fan		Minimum Cir-	Maximum Fuse Size.
			Sys. #1		Sys. #2
HCE	Code	Supply					HP	FLA (See Notes)	cuit Ampacity	Amps (See Note 2)
			RLA	LRA	RLA	LRA
180	40	380-3-60	16.7	123	16.7	123	1.0 EA.	2.5 EA.	42.6	50

NOTES:1. Condenser Fan Motors are supplied by one (1) autotransformer (p/n 025-32756-000) used to elevate 380 volt supply to 475 volt. Full load Amp rating at 460-3-60 supply is 2.4 amp rating at 380 volt supply terminals of autotransformer is 2.6.

2.Dual Element time delay type fuses or HACR circuit breakers. Refer to NEC/NFPA No. 70, Articles 440-11 & 12 for information on disconnect size.

J￿

Subject to change without notice. Printed in U.S.A.		035-17392-000 REV. A (0401)
Copyright © by Unitary Products Group 2000. All rights reserved.		Supersedes: 035-17318-000 Rev. A (10/00)
Unitary	5005	Norman
Product	York	OK
Group	Drive	73069