Position the front lockdown bracket (A) by adding 1.035" with measurement x in step 3 as shown in detail 2. Attach to desktop using two #8 x 3/4" phillips screws (H).
NOTE: If feet on base are taller than 1/8", use washers (G) between bracket (A) and desktop to achieve desired height as shown in detail 3.
DETAIL 2
+ | + |
1.035 |
|
(26) |
|
+ | A |
X |
|
ATTACHMENT POINT | |
FRONT EDGE OF STAND | |
H
H
A
G
A
DESKTOP G
DETAIL 3
Remove rubber feet or screws from one or two locations on back of stand depending on stand. Remove rubber feet or screws from one or two locations on front of stand. Attach back lockdown brackets (B) to stand with screws (E). On front location(s) leave 3/16" gap between stand and screw (E).
IDEAL
OR
B 
B
ALTERNATE
B
FRONT OF | FRONT OF |
STAND | STAND |
BOTTOM VIEW | BOTTOM VIEW |
Flip TV stand right side up and slide into front lockdown bracket (A) so that screw in hole 1 locks securely into slot of bracket.
| TV STAND |
| TV STAND |
DESKTOP | A | DESKTOP | A |
|
| ||
| SIDE VIEW |
| SIDE VIEW |
| 2 of 3 |
| ISSUED: |
Visit the Peerless Web Site at www.peerlessmounts.com | For customer service call |