Peerless Industries SUF650P manual Tools Needed for Assembly, Table of Contents

Page 2

NOTE: Read entire instruction sheet before you start installation and assembly.

WARNING

Do not begin to install your Peerless product until you have read and understood the instructions and warnings contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, for US customers please call Peerless customer care at 1-800-865-2112, for all international customers, please contact your local distributor.

This mount is designed to attach the screen 0.33" from the wall. Please refer to manufacturer's installation guide recommendations for required distance from wall to avoid risk of injury or property damage.

This product should only be installed by someone of good mechanical aptitude, has experience with basic building construction, and fully understands these instructions.

Make sure that the supporting surface will safely support the combined load of the equipment and all attached hardware and components.

Never exceed the Maximum Load Capacity. See page one.

If mounting to wood wall studs, make sure that mounting screws are anchored into the center of the studs. Use of an "edge to edge" stud finder is highly recommended.

Always use an assistant or mechanical lifting equipment to safely lift and position equipment.

Tighten screws firmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding power.

This product is intended for indoor use only. Use of this product outdoors could lead to product failure and personal injury.

This product was designed to be installed on the following wall construction only;

WALL CONSTRUCTION

HARDWARE REQUIRED

Wood Stud

Included

Wood Beam

Included

Solid Concrete

Included

Cinder Block

Included

Metal Stud

Do not attach except with Peerless Metal Stud Accessory Kit

 

 

- ACC415;

Brick

Contact Qualified Professional (not evaluated by UL)

Other or unsure?

Contact Qualified Professional

Tools Needed for Assembly

stud finder ("edge to edge" stud finder is recommended)

drill

5/16" (8 mm) bit for concrete and cinder block wall

5/32" (4 mm) bit for wood stud wall

level

Table of Contents

Parts List

3

Installation to Wood Stud Wall

4

Installation to Solid Concrete/Cinder Block walls

5

Installing Adapter Brackets

6

Mounting and Removing Flat Panel Screen

8

2 of 34

ISSUED: 05-29-08 SHEET #: 202-9282-5 12-01-09

Image 2
Contents Models SUF650P Screen Compatability RequirementsTools Needed for Assembly Table of ContentsParts List Description QtyInstallation to Wood Stud Wall Installation to Solid Concrete or Cinder Block Solid ConcreteInstalling Adapter Brackets For Flat Back Screen For Bump-out or Recessed Back ScreenMounting and Removing Flat Panel Screen DetailModelo SUF650P Requisitos para la compatibilidad de las pantallasEspañol Herramientas necesarias para el ensamblajeTabla de centenido 10 deDescripción Cantidad De pieza 11 deInstalación en una pared con montantes de madera 12 de13 de Instalación de los soportes adaptadores 14 de15 de Instalación y desinstalación de la pantalla plana 16 deModèle SUF650P Exigences de compatibilité avec lécranFrançais Outils nécessaires au montageTable des matières 18 surDescription Qté Pièce nº 19 surInstallation sur des murs à en bois 20 surInstallation sur du béton plein/block de béton 21 surInstallation des supports adaptateurs 22 sur23 sur Pour les écrans à dos platPour un écran à dos convexe ou concave Montage et demontage dun écran plat 24 surModelle SUF650P Anforderungen an Bildschirmkompatibilät Deutsch Für den Zusammenbau erforderliche WerkzeugeInhaltsverzeichnis 26 vanDeutsch 27 van BeschreibungTeile Nr 28 van Installation zu verdoppeln HolzständerreiheAbbildung Installation zu massivbeton oder porenbetonstein 29 vanAnbringung von Adapterhalterungen 30 van31 van Bildschirme mit flacher RückseiteBildschirme mit Wölbung oder Vertiefung an der Rückseite 32 van Anbringung und Abnahme des FlachbildschirmsDetailansicht Limited FIVE-YEAR Warranty Garantie DE Cinq ANS

SUF650P specifications

The Peerless Industries SUF650P offers an innovative solution for mounting flat panel displays, blending versatility with cutting-edge technology to meet the demands of commercial and residential applications. This adjustable TV mount is designed to accommodate a range of screen sizes, making it an ideal choice for various settings, including conference rooms, classrooms, and living spaces.

One of the standout features of the SUF650P is its low-profile design. Once the television is mounted, it sits just 1.3 inches from the wall, creating a sleek and streamlined appearance. This aesthetic benefit is complemented by the mount's ability to support displays ranging from 32 to 65 inches, with a weight capacity of up to 150 pounds. This ensures that users can confidently select from a wide variety of TV models without compromising on safety or reliability.

The SUF650P also incorporates advanced tilt and swivel capabilities, allowing for optimal viewing angles. With a tilt range of +5 to -15 degrees, viewers can adjust the screen to minimize glare and enhance comfort. Additionally, the mount offers lateral movement, enabling fine-tuning of the display position after installation. This versatility is particularly advantageous in multi-purpose environments where screen alignment may need to be adjusted.

Installation is made simple with the SUF650P, thanks to its easy-to-follow instructions and integrated cable management system that helps keep wires organized and out of sight. The mount's universal design is compatible with most VESA standards, ensuring compatibility with a majority of television brands and models.

Another notable characteristic is its robust construction. The mount is engineered with high-quality materials providing durability and stability over time. Its durable finish not only ensures longevity but also protects against scratches and wear, making it suitable for high-traffic areas.

In summary, the Peerless Industries SUF650P is more than just a TV mount; it represents a perfect blend of functionality, aesthetics, and dependability. Whether for personal use or professional settings, this adjustable mount enhances the viewing experience while maintaining a clean and modern look. With its impressive features and design, the SUF650P stands out as a top choice in the realm of TV mounting solutions.